UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
IPV6(7)                    Linux Programmer's Manual                   IPV6(7)

NAME
       ipv6, AF_INET6 - Linux IPv6 protocol implementation

SYNOPSIS
       #include <sys/socket.h>
       #include <netinet/in.h>

       tcp6_socket = socket(AF_INET6, SOCK_STREAM, 0);
       raw6_socket = socket(AF_INET6, SOCK_RAW, protocol);
       udp6_socket = socket(AF_INET6, SOCK_DGRAM, protocol);

DESCRIPTION
       Linux 2.2 optionally implements the Internet Protocol, version 6.  This
       man page contains a description of the IPv6 basic API as implemented by
       the  Linux  kernel  and  glibc  2.1.  The interface is based on the BSD
       sockets interface; see socket(7).

       The IPv6 API aims to be  mostly  compatible  with  the  IPv4  API  (see
       ip(7)).  Only differences are described in this man page.

       To  bind an AF_INET6 socket to any process, the local address should be
       copied from the in6addr_any  variable  which  has  in6_addr  type.   In
       static  initializations,  IN6ADDR_ANY_INIT  may  also  be  used,  which
       expands to a constant expression.  Both of them  are  in  network  byte
       order.

       The   IPv6   loopback   address   (::1)  is  available  in  the  global
       in6addr_loopback variable.  For initializations,  IN6ADDR_LOOPBACK_INIT
       should be used.

       IPv4 connections can be handled with the v6 API by using the v4-mapped-
       on-v6 address type; thus a program only needs to support this API  type
       to  support  both  protocols.   This  is  handled  transparently by the
       address handling functions in the C library.

       IPv4 and IPv6 share the local port space.  When you get an IPv4 connec-
       tion  or  packet to a IPv6 socket, its source address will be mapped to
       v6 and it will be mapped to v6.

   Address Format
           struct sockaddr_in6 {
               sa_family_t     sin6_family;   /* AF_INET6 */
               in_port_t       sin6_port;     /* port number */
               uint32_t        sin6_flowinfo; /* IPv6 flow information */
               struct in6_addr sin6_addr;     /* IPv6 address */
               uint32_t        sin6_scope_id; /* Scope ID (new in 2.4) */
           };

           struct in6_addr {
               unsigned char   s6_addr[16];   /* IPv6 address */
           };

       sin6_family is always set to AF_INET6; sin6_port is the  protocol  port
       (see  sin_port  in  ip(7));  sin6_flowinfo is the IPv6 flow identifier;
       sin6_addr is the 128-bit IPv6 address.  sin6_scope_id is an ID  depend-
       ing  on  the scope of the address.  It is new in Linux 2.4.  Linux only
       supports it for link scope addresses, in that case  sin6_scope_id  con-
       tains the interface index (see netdevice(7))

       IPv6  supports several address types: unicast to address a single host,
       multicast to address a group of hosts, anycast to address  the  nearest
       member  of a group of hosts (not implemented in Linux), IPv4-on-IPv6 to
       address a IPv4 host, and other reserved address types.

       The address notation for IPv6 is a group of 16 2-digit hexadecimal num-
       bers,  separated with a ':'.  "::" stands for a string of 0 bits.  Spe-
       cial addresses are ::1  for  loopback  and  ::FFFF:<IPv4  address>  for
       IPv4-mapped-on-IPv6.

       The port space of IPv6 is shared with IPv4.

   Socket Options
       IPv6  supports  some  protocol-specific  socket options that can be set
       with setsockopt(2) and read  with  getsockopt(2).   The  socket  option
       level for IPv6 is IPPROTO_IPV6.  A boolean integer flag is zero when it
       is false, otherwise true.

       IPV6_ADDRFORM
              Turn an AF_INET6 socket into a socket  of  a  different  address
              family.   Only  AF_INET  is currently supported for that.  It is
              only allowed for IPv6 sockets that are connected and bound to  a
              v4-mapped-on-v6  address.  The argument is a pointer to an inte-
              ger containing AF_INET.  This is useful to pass v4-mapped  sock-
              ets  as file descriptors to programs that don't know how to deal
              with the IPv6 API.

       IPV6_ADD_MEMBERSHIP, IPV6_DROP_MEMBERSHIP
              Control membership in multicast groups.  Argument is  a  pointer
              to a struct ipv6_mreq structure.

       IPV6_MTU
              Set  the  MTU  to be used for the socket.  The MTU is limited by
              the device MTU or the  path  mtu  when  path  mtu  discovery  is
              enabled.  Argument is a pointer to integer.

       IPV6_MTU_DISCOVER
              Control  path  mtu discovery on the socket.  See IP_MTU_DISCOVER
              in ip(7) for details.

       IPV6_MULTICAST_HOPS
              Set the multicast hop limit  for  the  socket.   Argument  is  a
              pointer  to  an  integer.   -1  in the value means use the route
              default, otherwise it should be between 0 and 255.

       IPV6_MULTICAST_IF
              Set the device for outgoing multicast  packets  on  the  socket.
              This  is  only  allowed for SOCK_DGRAM and SOCK_RAW socket.  The
              argument is a pointer to an interface index  (see  netdevice(7))
              in an integer.

       IPV6_MULTICAST_LOOP
              Control  whether  the  socket sees multicast packets that it has
              send itself.  Argument is a pointer to boolean.

       IPV6_PKTINFO
              Set delivery of the IPV6_PKTINFO  control  message  on  incoming
              datagrams.   Only  allowed  for  SOCK_DGRAM or SOCK_RAW sockets.
              Argument is a pointer to a boolean value in an integer.

       IPV6_RTHDR,  IPV6_AUTHHDR,  IPV6_DSTOPS,  IPV6_HOPOPTS,  IPV6_FLOWINFO,
       IPV6_HOPLIMIT
              Set delivery of control messages for incoming datagrams contain-
              ing  extension headers from the received packet.  IPV6_RTHDR de-
              livers the routing header, IPV6_AUTHHDR delivers the authentica-
              tion  header,  IPV6_DSTOPTS  delivers  the  destination options,
              IPV6_HOPOPTS delivers the hop options, IPV6_FLOWINFO delivers an
              integer  containing the flow ID, IPV6_HOPLIMIT delivers an inte-
              ger containing the hop count of the packet.   The  control  mes-
              sages have the same type as the socket option.  All these header
              options can also be set for outgoing packets by putting the  ap-
              propriate control message into the control buffer of sendmsg(2).
              Only allowed for SOCK_DGRAM or SOCK_RAW sockets.  Argument is  a
              pointer to a boolean value.

       IPV6_RECVERR
              Control receiving of asynchronous error options.  See IP_RECVERR
              in ip(7) for details.  Argument is a pointer to boolean.

       IPV6_ROUTER_ALERT
              Pass forwarded packets containing a router alert hop-by-hop  op-
              tion  to  this  socket.  Only allowed for SOCK_RAW sockets.  The
              tapped packets are not forwarded by the kernel, it is the user's
              responsibility to send them out again.  Argument is a pointer to
              an integer.  A positive integer indicates a router alert  option
              value to intercept.  Packets carrying a router alert option with
              a value field containing this integer will be delivered  to  the
              socket.   A  negative  integer disables delivery of packets with
              router alert options to this socket.

       IPV6_UNICAST_HOPS
              Set the unicast hop limit for the socket.  Argument is a pointer
              to  an  integer.   -1  in the value means use the route default,
              otherwise it should be between 0 and 255.

       IPV6_V6ONLY (since Linux 2.4.21 and 2.6)
              If this flag is set to true (nonzero), then the  socket  is  re-
              stricted  to  sending  and receiving IPv6 packets only.  In this
              case, an IPv4 and an IPv6 application can bind to a single  port
              at the same time.

              If this flag is set to false (zero), then the socket can be used
              to send and receive packets to and from an IPv6  address  or  an
              IPv4-mapped IPv6 address.

              The argument is a pointer to a boolean value in an integer.

              The  default  value  for this flag is defined by the contents of
              the file /proc/sys/net/ipv6/bindv6only.  The default  value  for
              that file is 0 (false).

VERSIONS
       The older libinet6 libc5 based IPv6 API implementation for Linux is not
       described here and may vary in details.

       Linux 2.4 will break binary  compatibility  for  the  sockaddr_in6  for
       64-bit  hosts by changing the alignment of in6_addr and adding an addi-
       tional sin6_scope_id field.  The kernel interfaces stay compatible, but
       a  program including sockaddr_in6 or in6_addr into other structures may
       not be.  This is not a problem for 32-bit hosts like i386.

       The sin6_flowinfo field is new  in  Linux  2.4.   It  is  transparently
       passed/read  by  the kernel when the passed address length contains it.
       Some programs that pass a longer address buffer and then check the out-
       going address length may break.

NOTES
       The  sockaddr_in6  structure is bigger than the generic sockaddr.  Pro-
       grams that assume that all address types can  be  stored  safely  in  a
       struct  sockaddr  need to be changed to use struct sockaddr_storage for
       that instead.

BUGS
       The IPv6 extended API as in RFC 2292 is currently  only  partly  imple-
       mented; although the 2.2 kernel has near complete support for receiving
       options, the macros for generating IPv6 options are  missing  in  glibc
       2.1.

       IPSec support for EH and AH headers is missing.

       Flow label management is not complete and not documented here.

       This man page is not complete.

SEE ALSO
       cmsg(3), ip(7)

       RFC 2553: IPv6 BASIC API.  Linux tries to be compliant to this.

       RFC 2460: IPv6 specification.

COLOPHON
       This  page  is  part of release 3.25 of the Linux man-pages project.  A
       description of the project, and information about reporting  bugs,  can
       be found at http://www.kernel.org/doc/man-pages/.

Linux                             2009-02-28                           IPV6(7)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=ipv6
Gedruckt am: 11.12.2017 06:31 GMT+0100 (2017-12-11T06:31:54+01:00)