UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
IFCFG-VLAN(5)                Network configuration               IFCFG-VLAN(5)

NAME
       ifcfg-vlan - virtual LAN interface configuration

SYNOPSIS
       /etc/sysconfig/network/ifcfg-vlan*

Virtual LANs (802.1q)
       To  setup  a vlan interface you need a configuration file that contains
       at least the mandatory

       ETHERDEVICE
              variable with the real interface used for the virtual LAN.

       Further, it may contain the optional

       VLAN_ID
              variable that specifies the VLAN ID.

       By default and when the VLAN_ID variable is not set, the number at  the
       end of the interface name is the VLAN ID.

       Preferably  the  interface  name  and the configuration file follow the
       VLAN interface name scheme (type), that is either:
              ifcfg-vlan<VLAN-ID> (e.g. ifcfg-vlan42)

              or

              ifcfg-name.<VLAN-ID> (e.g. ifcfg-eth0.42)

       The VLAN-ID  can  be  also  0-padded  (e.g.  ifcfg-vlan0042  or  ifcfg-
       eth0.0042).

       Also  in case of custom names, trailing digits are interpreted as VLAN-
       ID by default (e.g. ifcfg-dmz42). When VLAN_ID is set  in  the  config,
       the interface name have any name (e.g. ifcfg-foobar).

       Note: The drawback of custom interface names and VLAN_ID usage is, that
       a rename of the interface is required and that they  violate  the  name
       scheme.

       The real interface will be set UP automatically and doesn't need a con-
       fig file in case of a physical interface. But  without  a  config  file
       YaST will consider this interface as unused, if will not follow hotplug
       events and you're unable to apply any settings,  e.g.  ETHTOOL_OPTIONS.
       To avoid that, provide an config file with at least STARTMODE='auto'.

       The  rest of the VLAN interface IP and routes configuration do not dif-
       fer from ordinary interfaces. See also  man ifcfg  and  man routes  for
       details.

EXAMPLES
       Sets up vlan3 vlan interface on top of eth0:

              ifcfg-vlan3
                 STARTMODE='auto'
                 ETHERDEVICE='eth0'
                 IPADDR='192.168.3.27/24'

       Sets up eth0.3 vlan interface on top of eth0:

              ifcfg-eth0.3
                 STARTMODE='auto'
                 ETHERDEVICE='eth0'
                 IPADDR='192.168.3.27/24'

       Sets up lan1 vlan interface with ID 42 on top of eth0:

              ifcfg-lan1
                 STARTMODE='auto'
                 ETHERDEVICE='eth0'
                 VLAN_ID='42'
                 IPADDR='192.168.3.27/24'

BUGS
       Please report bugs at <http://www.suse.de/feedback>

AUTHOR
       Christian Zoz <zoz@suse.de>
       Michal Svec <msvec@suse.cz>
       Bjoern Jacke
       Mads Martin Joergensen <mmj@suse.de>
       Michal Ludvig <mludvig@suse.cz>
       Marius Tomaschewski <mt@suse.de>

SEE ALSO
       routes(5), ifcfg(5), ifup(8).

sysconfig                         August 2004                    IFCFG-VLAN(5)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=ifcfg-vlan
Gedruckt am: 11.12.2017 06:27 GMT+0100 (2017-12-11T06:27:32+01:00)