UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
Hpcdtoppm User Manual(0)                              Hpcdtoppm User Manual(0)

NAME
       hpcdtoppm - convert a Photo-CD image into a PBM image

SYNOPSIS
       hpcdtoppm infile [-a] [{-C|-0|-Overview|-O} file opt] [-c0] [-c-] [-c+]
       [-crop] [-d] [-dpi f] [-eps] [-epsd] [-epsg] [-fak scale] [-hori]  [-i]
       [-l]  [-m]  [-n]  [-pb pos] [-pgm] [-ph height] [-pl pos] [-pos] [-ppm]
       [-ps] [-psd] [-psg] [-pw  width]  [-r]  [-rep]  [-S  long  short]  [-s]
       [-vert]   [-x]   [-ycc]   [-1|-Base/16|-128x192]  [-2|-Base/4|-256x384]
       [-3|-Base|-512x768]   [-4|-4Base|-1024x1536]    [-5|-16Base|-2048x3072]
       [-6|-64Base|-4096x6144] [outfile]

DESCRIPTION
       This program is part of Netpbm(1)

       This  program  accepts  Photo-CD  image  or overview file data from the
       specified input file, infile (or,  if  the  resolution  is  lower  than
       64Base  and  the file argument is specified as -, from standard input),
       and writes either PBM Format or PostScript to the specified output file
       (or to standard output if no file is specified).

       On   a   standard   Photo-CD,  image  files  appear  in  the  directory
       photo_cd/images, in files with names of  the  form  imgnnnn.pcd,  where
       nnnn   is   a   4-digit-number.    The   overview   file   appears   in
       photo_cd/overview.pcd.

       Photo-CD images are stored using as many as 6 different resolutions:

                 Format              Resolution
                 ------              ----------
                 64Base              4096x6144 (ProPhotoCD only)
                 16Base              2048x3072
                 4Base               1024x1536
                 Base                512x768
                 Base/4              256x384
                 Base/16             128x192

       The overview file employs Base/16 format.

OPTIONS
       Invoking hpcdtoppm without arguments produces a list of default values.
       Note that you can supply only one size option.

       -a     Automatically determine image orientation (this option is exper-
              imental, and does not work for overview files).

       {-C | -0 | -Overview | -O } file opt
              Extract all images from an overview file.   The  mandatory  file
              argument  is  the  name  of  a  PPM file; output files are named
              filennnn, where nnnn is a 4-digit number.  Overview  images  are
              extracted  in  their  original Base/16 format.  The value of opt
              determines the orientation of the contact  sheet  image;  recog-
              nized values are:

       n      Do not rotate the image.

       l      Rotate the picture counter-clockwise (portrait mode).

       r      Rotate the picture clockwise (portrait mode).

       -c0    Do not correct (brighten or darken) the image.

       -c-    Darken the image.

       -c+    Brighten the image.

       -crop  Cut  off  the  black  frame which sometimes appears at the image
              borders.

       -d     Show only the decompressed difference rather than  the  complete
              image (applicable only to 4Base and 16Base images).

       -dpi res
              Set  the  printer  resolution  to  res  for  dithered Postscript
              images.

       -eps   Write a RGB Encapsulated Postscript color image.

       -epsd  Write  a  Floyd-Steinberg   dithered   image   in   Encapsulated
              Postscript.

       -epsg  Write a grayscale image in Encapsulated Postscript.

       -fak scale
              Set  the scaling factor for dithered PostScript images to scale.

       -hori  Flip the image horizontally.

       -i     Send information from an image file header to Standard Error.

       -l     Rotate the picture counter-clockwise (portrait mode).

       -m     Write messages about the phases of decoding to standard error.

       -n     Do not rotate the image.

       -pb pos
              Set the bottom position of the Postscript image to pos.

       -pgm   Write a pgm (grayscale) image.

       -ph height
              Set the height of the Postscript image to height.

       -pl pos
              Set the leftmost position of the Postscript image to pos.

       -pos   Print the relative starting position of the data for the current
              resolution.

       -ppm   Write a ppm RGB (color) image.

       -ps    Write a RGB Postscript color image.

       -psd   Write a Floyd-Steinberg dithered image in Postscript.

       -psg   Write a Postscript grayscale image.

       -pw width
              Set the width of the Postscript image to width.

       -r     Rotate the picture clockwise (portrait mode).

       -rep   Try to jump over reading errors in the Huffman code.

       -S long short
              Cut out a subrectangle with boundaries defined by the values:

       long   For the longer side of the image.

       short  For the shorter side of the image.

              where long and short take one of two forms:

       a-b    Cut from position a to position b.

       a+b    Starting at offset a, cut a length of b.

              and  where  a and b are either integers representing pixel loca-
              tions, or floating point values over the range  [0.0  ...  1.0],
              representing the fraction of the length of a side.

       -s     Apply a simple sharpness operator to the luminosity channel.

       -vert  Flip the image vertically.

       -x       Overskip Mode (applicable to Base/16, Base/4, Base and 4Base).
              In Photo-CD images the luminosity channel is stored in full res-
              olution,  the two chromaticity channels are stored in half reso-
              lution only and have to be interpolated.  In Overskip Mode,  the
              chromaticity  channels  of  the next higher resolution are taken
              instead of interpolating.  To see the difference,  generate  one
              PPM with and one PPM without this option.  Use pamarith(1)
               to  generate  the  difference  image of these two images.  Call
              ppmhist(1)

              for this difference or show it with xv (push the  HistEq  button
              in the color editor).

       -ycc   Write  the  image in a variation on PPM format in which the sam-
              ples are YCC instead of RGB.

       -1|-Base/16|-128x192
              Extract the Base/16 image.

       -2|-Base/4|-256x384
              Extract the Base/4 image.

       -3|-Base|-512x768
              Extract the Base image.

       -4|-4Base|-1024x1536
              Extract the 4Base image.

       -5|-16Base|-2048x3072
              Extract the 16Base image.

       -6|-64Base|-4096x6144
              Extract the 64Base image.  This resolution can be extracted from
              ProPhotoCD  images only.  The path of the 64Base extension files
              is derived from the path to the image file. This means  that  it
              doesn't  work  on  stdin  an the directory structure must be the
              very same as on the ProPhotoCD.

Postcript Output
       For Postscript output (options -ps, -eps, -psg, -epsg, -psd, -epsg) you
       can  define  both the resolution and placement of the image.  Both size
       and position are specified in points (1/72 inch).

       The position of the image (where the origin is assumed  to  be  at  the
       lower left corner of the page) is controlled by the -pl and -pb options
       (applicable at all resolutions).

       The size of color and grayscale images is changed with the -pw and  -ph
       options.  Every image pixel is mapped onto one Postscript pixel.

       There are three modes of control for dithered Postscript:

       Image size
               (-pw and -ph)

       Printer resolution
              (-dpi)

       Scaling factor
              (-fak)

       These  three  factors are interdependent, hence no more then two can be
       specified simultaneously.  Using -dpi and the -pw/-ph options  together
       often yields pleasing results.  Even using the default values for these
       options will produce results differing from those obtained without  use
       of the options.

Limitations
       The program ignores read protection.

       The -i option is not working correctly.

       Available  information obout the Photo-CD format is vague; this program
       was developed by trial-and-error after staring  at  hex-dumps.   Please
       send bugs reports and patches to the author.

SEE ALSO
       pcdovtoppm(1)  , pamarith(1) , ppm(5) , ppmhist(1) , pnmquant(1) , ppm-
       topgm(1) , ppmtorgb3(1) , xv

VERSION
       The name hpcdtoppm stands for 'Hadmut's pcdtoppm,' to make  it  distin-
       guishable in the event that someone else is building a similar applica-
       tion and naming it pcdtoppm.

       This is version 0.6.

AUTHOR
       Copyright (c) 1992, 1993, 1994 by Hadmut Danisch  (danisch@ira.uka.de).

       Hadmut  Danish has given permission to Bryan Henderson (August 2003) to
       distribute this documentation as part  of  Netpbm  on  Sourceforge  and
       therefore to license this copy of this documentation to the public with
       the following Sourceforge-compatible license.  Note that  this  license
       does  not contain a restriction on one's right to sell the material, as
       does the hpcdtoppm program itself and other copies of  this  documenta-
       tion.

       This  software  is not public domain.  Permission to use and distribute
       this software and its documentation for noncommercial use  and  without
       fee  is hereby granted, provided that the above copyright notice appear
       in all copies and that both that copyright notice and  this  permission
       notice appear in supporting documentation.

       The hpcdtoppm software itself (as opposed to this supporting documenta-
       tion) is licensed by Danisch under a similar license, but with an addi-
       tional restriction that a recipient may not sell the software or use it
       in profit-making activity.  See the source  code  of  the  program  for
       details on its license.

        Manual    page    extensively   modified   by   R.   P.   C.   Rodgers
       (rodgers@nlm.nih.gov).

netpbm documentation             7 August 2003        Hpcdtoppm User Manual(0)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=hpcdtoppm
Gedruckt am: 13.12.2017 11:58 GMT+0100 (2017-12-13T11:58:38+01:00)