UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
GROFF_MAN(7)                                                      GROFF_MAN(7)

NAME
       groff_man - groff `man' macros to support generation of man pages

SYNOPSIS
       groff -man [ options... ] [ files... ]
       groff -m man [ options... ] [ files... ]

DESCRIPTION
       The  man  macros  used to generate man pages with groff were written by
       James Clark.  This document provides a brief summary of the use of each
       macro in that package.

OPTIONS
       The  man  macros  understand  the following command line options (which
       define various registers).

       -rLL=line-length
              Set line length.  If this option is not given, the  line  length
              defaults to 78n in nroff mode and 6.5i in troff mode.

       -rLT=title-length
              Set title length.  If this option is not given, the title length
              defaults to 78n in nroff mode and 6.5i in troff mode.

       -rcR=1 This option (the default if in nroff mode) will create a single,
              very long page instead of multiple pages.  Say -rcR=0 to disable
              it.

       -rC1   If more than one manual page is given on the command line,  num-
              ber the pages continuously, rather than starting each at 1.

       -rD1   Double-sided  printing.  Footers for even and odd pages are for-
              matted differently.

       -rPnnn Enumeration of pages will start with nnn rather than with 1.

       -rSxx  Base document font size is xx points (xx can be 10,  11,  or 12)
              rather than 10 points.

       -rXnnn After  page nnn,  number  pages  as  nnna, nnnb, nnnc, etc.  For
              example, the option `-rX2' will produce the following page  num-
              bers: 1, 2, 2a, 2b, 2c, etc.

USAGE
       This section describes the available macros for manual pages.  For fur-
       ther customization, put additional macros and requests  into  the  file
       man.local which will be loaded immediately after the man package.

       .TH title section [extra1] [extra2] [extra3]
              Sets  the title of the man page to title and the section to sec-
              tion, which must take on a value between  1  and 8.   The  value
              section may also have a string appended, e.g. `.pm', to indicate
              a specific subsection of the man pages.  Both title and  section
              are  positioned  at  the left and right in the header line (with
              section in parentheses immediately appended  to  title.   extra1
              will  be  positioned  in  the middle of the footer line.  extra2
              will be positioned at the left in the footer line (resp. at  the
              left on even pages and at the right on odd pages if double-sided
              printing is active).  extra3 is centered in the header line.

              For HTML output, headers and footers are completely supressed.

              Additionally, this macro starts a new page; the new line  number
              is 1  again (except if the `-rC1' option is given on the command
              line) -- this feature is intended only for  formatting  multiple
              man pages; a single man page should contain exactly one TH macro
              at the beginning of the file.

       .SH [text for a heading]
              Sets up an unnumbered section heading sticking out to the  left.
              Prints  out  all the text following SH up to the end of the line
              (resp. the text in the next input line if there is  no  argument
              to  SH)  in  bold  face,  one size larger than the base document
              size.  Additionally, the left margin for the following  text  is
              reset to its default value.

       .SS [text for a heading]
              Sets  up  an  secondary, unnumbered section heading.  Prints out
              all the text following SS up to the end of the line  (resp.  the
              text  in  the  next input line if there is no argument to SS) in
              bold face, at the same size as the base  document  size.   Addi-
              tionally, the left margin for the following text is reset to its
              default value.

       .TP [nnn]
              Sets up an indented paragraph with label.   The  indentation  is
              set to nnn if that argument is supplied (the default unit is `n'
              if omitted), otherwise it is  set  to  the  default  indentation
              value.   The  first  input  line of text following this macro is
              interpreted as a string to  be  printed  flush-left,  as  it  is
              appropriate  for  a  label.   It is not interpreted as part of a
              paragraph, so there is no attempt to fill the  first  line  with
              text from the following input lines.  Nevertheless, if the label
              is not as wide as the indentation, then the paragraph starts  at
              the same line (but indented), continuing on the following lines.
              If the label is wider than the indentation, then the descriptive
              part  of  the  paragraph begins on the line following the label,
              entirely indented.  Note that neither font shape nor  font  size
              of  the  label is set to a default value; on the other hand, the
              rest of the text will have default font settings.  The TP  macro
              is the macro used for the explanations you are just reading.

       .LP
       .PP
       .P     These  macros  are  mutual  aliases.   Any of them causes a line
              break at the current position,  followed  by  a  vertical  space
              downwards  by  the  amount  specified by the PD macro.  The font
              size and shape are  reset  to  the  default  value  (10pt  resp.
              Roman).  Finally, the current left margin is restored.

       .IP [designator] [nnn]
              Sets up an indented paragraph, using designator as a tag to mark
              its beginning.  The indentation is set to nnn if  that  argument
              is  supplied (default unit is `n'), otherwise the default inden-
              tation value is used.  Font size and face of the paragraph  (but
              not  the  designator) are reset to its default values.  To start
              an indented paragraph with a particular indentation but  without
              a  designator,  use  `""' (two doublequotes) as the second argu-
              ment.

              For example, the following paragraphs were all set up with  bul-
              lets as the designator, using `.IP \(bu 4':

              o   IP  is  one  of  the three macros used in the man package to
                  format lists.

              o   HP is another.  This macro produces a paragraph with a  left
                  hanging indentation.

              o   TP is another.  This macro produces an unindented label fol-
                  lowed by an indented paragraph.

       .HP [nnn]
              Sets up a paragraph with hanging left indentation.  The indenta-
              tion is set to nnn if that argument is supplied (default unit is
              `n'), otherwise the default indentation  value  is  used.   Font
              size  and  face  are reset to its default values.  The following
              paragraph illustrates the effect  of  this  macro  with  hanging
              indentation set to 4:

              This is a paragraph following an invocation of the HP macro.  As
                  you can see, it produces a paragraph where all lines but the
                  first are indented.

       .RS [nnn]
              This  macro  moves the left margin to the right by the value nnn
              if specified (default unit is `n'); otherwise the default inden-
              tation value is used.  Calls to the RS macro can be nested.

       .RE [nnn]
              This  macro moves the left margin back to level nnn; if no argu-
              ment is given, it moves one level back.  The first level  (i.e.,
              no  call  to RS yet) has number 1, and each call to RS increases
              the level by 1.

       To summarize, the following macros cause a line break with  the  inser-
       tion of vertical space (which amount can be changed with the PD macro):
       SH, SS, TP, LP (PP, P), IP, and HP.  The macros RS and RE also cause  a
       break  but no insertion of vertical space.  Finally, the macros SH, SS,
       LP (PP, P), and RS reset the indentation to its default value.

MACROS TO SET FONTS
       The standard font is Roman; the default text size is 10 point.

       .SM [text]
              Causes the text on the same line or the text on the  next  input
              line to appear in a font that is one point size smaller than the
              default font.

       .SB [text]
              Causes the text on the same line or the text on the  next  input
              line to appear in boldface font, one point size smaller than the
              default font.

       .BI text
              Causes text on the same line to appear alternately in bold  face
              and  italic.   The  text  must  be on the same line as the macro
              call.  Thus

                     .BI this "word and" that

              would cause `this' and `that' to  appear  in  bold  face,  while
              `word and' appears in italics.

       .IB text
              Causes  text to appear alternately in italic and bold face.  The
              text must be on the same line as the macro call.

       .RI text
              Causes text on the same line to appear alternately in roman  and
              italic.  The text must be on the same line as the macro call.

       .IR text
              Causes text on the same line to appear alternately in italic and
              roman.  The text must be on the same line as the macro call.

       .BR text
              Causes text on the same line to appear alternately in bold  face
              and roman.  The text must be on the same line as the macro call.

       .RB text
              Causes text on the same line to appear alternately in roman  and
              bold face.  The text must be on the same line as the macro call.

       .B [text]
              Causes text to appear in bold face.  If no text  is  present  on
              the  line  where  the macro is called, then the text of the next
              input line appears in bold face.

       .I [text]
              Causes text to appear in italic.  If no text is present  on  the
              line  where the macro is called, then the text of the next input
              line appears in italic.

MISCELLANEOUS
       The default indentation is 7.2n for all output devices except for  gro-
       html which ignores indentation.

       .DT    Sets  tabs  every 0.5 inches.  Since this macro is always called
              during a TH request, it makes sense to call it only if  the  tab
              positions have been changed.

       .PD [nnn]
              Adjusts  the empty space before a new paragraph (resp. section).
              The optional argument gives the amount of space  (default  units
              are  `v');  without parameter, the value is reset to its default
              value (1 line for tty devices,  0.4v otherwise).   This  affects
              the macros SH, SS, TP, LP (resp. PP and P), IP, and HP.

       The following strings are defined:

       \*S    Switch back to the default font size.

       \*R    The `registered' sign.

       \*(Tm  The `trademark' sign.

       \*(lq
       \*(rq  Left  and  right  quote.   This  is  equal to `\(lq' and `\(rq',
              respectively.

       If a preprocessor like tbl or eqn is needed, it  has  become  usage  to
       make the first line of the man page look like this:

              .\" word

       Note  the single space character after the double quote.  word consists
       of letters for the needed preprocessors: `e' for eqn,  `r'  for  refer,
       and  `t'  for tbl.  Modern implementations of the man program read this
       first line and automatically call the right preprocessor(s).

FILES
       man.tmac
       an.tmac
              These are wrapper files to call andoc.tmac.

       andoc.tmac
              This file checks whether the man  macros  or  the  mdoc  package
              should be used.

       an-old.tmac
              All man macros are contained in this file.

       man.local
              Local changes and customizations should be put into this file.

SEE ALSO
       Since  the  man macros consist of groups of groff requests, one can, in
       principle, supplement the functionality of the man macros with individ-
       ual  groff requests where necessary.  A complete list of these requests
       is available on the WWW at

                http://www.cs.pdx.edu/~trent/gnu/groff/groff_toc.html

       tbl(1), eqn(1), refer(1), man(1)

AUTHOR
       This manual page was originally written for the Debian GNU/Linux system
       by Susan G. Kleinmann <sgk@debian.org>, corrected and updated by Werner
       Lemberg <wl@gnu.org>, and is now part of the GNU troff distribution.

Groff Version 1.18.1           05 September 2002                  GROFF_MAN(7)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=groff_man
Gedruckt am: 14.12.2017 11:15 GMT+0100 (2017-12-14T11:15:37+01:00)