UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
FIG2DEV(1)                                                          FIG2DEV(1)

NAME
       fig2dev - translates Fig code to various graphics languages

SYNOPSIS
       fig2dev -L language [ -m mag ] [ -f font ] [ -s fsize ] [ other options
       ] [ fig-file [ out-file ] ]

DESCRIPTION
       Fig2dev translates fig code in the named fig-file  into  the  specified
       graphics  language and puts them in out-file.  The default fig-file and
       out-file are standard input and standard output, respectively

       Xfig (Facility for Interactive Generation of figures) is a  screen-ori-
       ented tool which runs under the X Window System, and allows the user to
       draw and manipulate objects interactively.  This version of fig2dev  is
       compatible with xfig versions 1.3, 1.4, 2.0, 2.1, 3.0, 3.1 and 3.2.

       Xfig version 3.2.3 and later saves and allows the user to edit comments
       for each Fig object.  These comments are output  with  several  of  the
       output  languages,  such  as  PostScript,  CGM,  EMF,  LaTeX, MetaFont,
       PicTeX, (as % comments), tk (as # comments), and pic (as .\" comments).

GENERAL OPTIONS (all drivers)
       -L language
              Set the output graphics language.  Valid languages are box, cgm,
              epic, eepic, eepicemu, emf, eps, gif, ibmgl,  jpeg,  latex,  map
              (HTML image map), mf (MetaFont), mp (MetaPost), mmp (Multi-Meta-
              Post), pcx, pdf, pdftex, pdftex_t, pic, pictex,  png,  ppm,  ps,
              pstex,  pstex_t, ptk (Perl/tk), shape (LaTeX shaped paragraphs),
              sld (AutoCad slide format), svg (beta driver), textyl, tiff,  tk
              (tcl/tk), tpic, xbm and xpm.

              Notes:
              dvips  and  xdvi must be compiled with the tpic support (-DTPIC)
              for epic, eepic and tpic to work.
              You must have ghostscript  and  ps2pdf,  which  comes  with  the
              ghostscript  distribution  to  get the pdf output and the bitmap
              formats (png, jpeg, etc.), and the netpbm (pbmplus)  package  to
              get gif, xbm, xpm, and sld output.

       -h     Print  help  message  with  all options for all output languages
              then exit.

       -V     Print the program version number and exit.

       -D +/-rangelist
              With +rangelist, keep only  those  depths  in  the  list.   With
              -rangelist, keep all depths except those in the list. The range-
              list may be a list of comma-separated numbers  or  ranges  sepa-
              rated  by  colon (:). For example, -D +10,40,55:70,80 means keep
              only layers 10, 40, 55 through 70, and 80.

       -K     The selection of the depths with the  '-D  +/-rangelist'  option
              does  normally  not  affect the calcualtion of the bounding box.
              Thus the generated document might have a  much  larger  bounding
              box  than  necessary.  If  -K  is given then the bounding box is
              adjusted to include only those objects in the selected depths.

       -f font
              Set the default font used for text objects to font.  The default
              is Roman; the format of this option depends on the graphics lan-
              guage in use.  In TeX-based languages, the font is the  base  of
              the  name  given in lfonts.tex, for instance "cmr" for Roman, or
              "tt" for teletype.  In PostScript, it is any font name known  to
              the printer or interpreter.

       -G minor[:major][:unit]
              Draws  a grid on the page.  Specify thin, or thin and thick line
              spacing in one of several  units.   For  example,  "-G  .25:1cm"
              draws  a  thin,  gray  line every .25 cm and a thicker gray line
              every 1 cm.  Specifying "-G 1in" draws a thin line every 1 inch.
              Fractions  may  be  used,  e.g. "-G 1/16:1/2in" will draw a thin
              line every 1/16 inch (0.0625 inch) and a thick  line  every  1/2
              inch.
              Allowable units are: i, in, inch, f, ft, feet, c, cm, mm, and m.
              Only allowed for PostScript, EPS, PDF, and  bitmap  (GIF,  JPEG,
              etc) drivers for now.

       -j     Enable the I18N internationalization facility.

       -m mag Set  the  magnification  at which the figure is rendered to mag.
              The default is 1.0.  This may not be used with the  maxdimension
              option (-Z).

       -s size
              Set the default font size (in points) for text objects to fsize.
              The default is 11*mag, and thus is scaled by the -m option.   If
              there is no scaling, the default font is eleven point Roman."

       -Z maxdimension
              Scale the figure so that the maximum dimension (width or height)
              is maxdimension inches or cm, depending on  whether  the  figure
              was  saved  with imperial or metric units.  This may not be used
              with the magnification option (-m).

       other options
              The other options are specific to the choice  of  graphics  lan-
              guage, as described below.

CGM OPTIONS
       CGM  is  Computer Graphics Metafile, developed by ISO and ANSI and is a
       vector-based plus bitmap  language.   Microsoft  WORD,  PowerPoint  and
       probably  other  products  can import this format and display it on the
       screen, something that they won't do with EPS files that have an  ASCII
       preview.

       -b dummyarg
              Generate binary output (dummy argument required after the "-b").

       -r     Position arrowheads for CGM viewers that display rounded  arrow-
              heads.  Normally, arrowheads are pointed, so fig2dev compensates
              for this by moving the endpoint of the line back so the  tip  of
              the  arrowhead ends where the original endpoint of the line was.
              If the -r option is used, the position of  arrows  will  NOT  be
              corrected  for  compensating  line  width  effects,  because the
              rounded arrowhead doesn't extend  beyond  the  endpoint  of  the
              line.

EMF OPTIONS
       EMF  is Enhanced Metafile, developed by Microsoft and is a vector-based
       plus bitmap language.  Microsoft WORD, PowerPoint  and  probably  other
       products can import this format and display it on the screen, something
       that they won't do with EPS files that have an ASCII preview.

EPIC OPTIONS
       EPIC is an enhancement to LaTeX picture drawing  environment.   It  was
       developed  by  Sunil Podar of Department of Computer Science in S.U.N.Y
       at Stony Brook.

       EEPIC is an extension to EPIC and  LaTeX  picture  drawing  environment
       which  uses  tpic  specials as a graphics mechanism.  It was written by
       Conrad Kwok of Division of Computer Science at University  of  Califor-
       nia, Davis.

       EEPIC-EMU  is  an  EEPIC emulation package which does not use tpic spe-
       cials.

       -A factor
              Scale arrowheads by factor.  The width and height of  arrowheads
              is  divided by this factor.  This is because EPIC arrowheads are
              normally about double the size of TeX arrowheads.

       -E num Set encoding for text translation (0 = none, 1 = ISO-8859-1, 2 =
              ISO-8859-2)

       -F     Don't  set  the font face, series, and style; only set it's size
              and the baselineskip. By default, fig2dev sets all 5 font param-
              eters when it puts some text. The disadvantage is that you can't
              set the font from your LaTeX document. With this option on,  you
              can set the font from your LaTeX document (like "\sfshape \input
              picture.eepic").

              If any of the pictures included in your LaTeX document has  been
              generated with -F, then all pictures must be generated with this
              option.

              This option can be used only when fig2dev was compiled with NFSS
              defined.

       -l width
              Use  "\thicklines"  when width of the line is wider than lwidth.
              The default is 2.

       -P     Generate a complete LaTeX file. In other words, the output  file
              can  be  formatted without requiring any changes. The additional
              text inserted in the beginning and at the end  of  the  file  is
              controlled   by   the  configuration  parameter  "Preamble"  and
              "Postamble".

       -R     Allow rotated text. Rotated text will be set using the  \rotate-
              box     command.     So,    you    will    need    to    include
              "\usepackage{graphics}" in the preamble of your LaTeX  document.

              If  this  option is not set, then rotated text will be set hori-
              zontally.

       -S scale
              Set the scale to which the  figure  is  rendered.   This  option
              automatically  sets the magnification and size to scale / 12 and
              scale respectively.

       -t stretch
              Set the stretch factor of dashed lines to sretch.   The  default
              is 30.

       -v     Include comments in the output file.

       -W     Enable  variable  line  width.  By default, only two line widths
              are available: The normal line width (hinlines), and thick lines
              (hicklines),  if  a  line  width of more than one is selected in
              xfig.

       -w     Disable variable line width. Only "\thicklines"  and/or  "\thin-
              lines" commands will be generated in the output file.

              When variable line width option is enabled, "\thinlines" command
              is still used when line width is less than LineThick. One poten-
              tial  problem is that the width of "\thinlines" is 0.4pt but the
              resolution of Fig is 1/80 inch (approx. 1pt).  If  LineThick  is
              set to 2, normal lines will be drawn in 0.4pt wide lines but the
              next line width is already 2pt. One possible solution is to  set
              LineThick  to 1 and set the width of the those lines you want to
              be drawn in "\thinlines"  to 0.

              Due to this problem, Variable line width VarWidth  is  defaulted
              to be false.

IBM-GL (HP/GL) OPTIONS
       IBM-GL  (IBM  Graphics  Language)  is  compatible  with HP-GL (Hewlett-
       Packard Graphics Language).

       -a     Select ISO A4 (ANSI A) paper size if the default is ANSI A  (ISO
              A4) paper size.

       -c     Generate  instructions for an IBM 6180 Color Plotter with (with-
              out) an IBM Graphics Enhancement Cartridge (IBM-GEC).

       -d xll,yll,xur,yur
              Restrict plotting to a rectangular area  of  the  plotter  paper
              which  has  a  lower  left  hand corner at (xll,yll) and a upper
              right hand corner at (xur,yur).  All four numbers are in  inches
              and  follow -d in a comma-sparated list - xll,yll,xur,yur - with
              no spaces between them.

       -f file
              Load text character specifications from the table in  the  fonts
              file.  The table must have 36 entries - one for each font plus a
              default.  Each entry consists of 5 numbers which specify the 1.)
              standard  character  set  (0 - 4, 6 - 9, 30 - 39), 2.) alternate
              character set (0 - 4, 6 - 9, 30 - 39), 3.) character slant angle
              (degrees),  4.)  character  width scale factor and 5.) character
              height scale factor.

       -k     Precede output with PCL command to use HP/GL

       -l pattfile
              Load area fill line patterns from  the  table  in  the  pattfile
              file.  The table must have 21 entries - one for each of the area
              fill patterns.  Each entry consists of 5 numbers  which  specify
              the  1.)  pattern  number (-1 - 6), 2.) pattern length (inches),
              3.) fill type (1 - 5), 4.) fill spacing (inches)  and  5.)  fill
              angle (degrees).

       -m mag,x0,y0
              The  magnification  may  appear  as the first element in a comma
              separated list - mag,x0,y0 - where the second and third  parame-
              ters specify an offset in inches.

       -P     Rotate  the  figure  to  portrait mode. The default is landscape
              mode.

       -p penfile
              Load plotter pen specifications from the table  in  the  penfile
              file.  The table must have 9 entries - one for each color plus a
              default.  Each entry consists of 2 numbers which specify the 1.)
              pen number (1 - 8) and 2.) pen thickness (millimeters).

       -S speed
              Set the pen speed to speed (centimeters/second).

       -v     Plot  the  figure  upside-down  in portrait mode or backwards in
              landscape mode.  This allows you to write on the top surface  of
              overhead  transparencies  without  disturbing the plotter ink on
              the bottom surface.

       Fig2dev may be installed with either ANSI A or  ISO  A4  default  paper
       size.   The  -a  option selects the alternate paper size.  Fig2dev does
       not fill closed splines.  The IBM-GEC is required to fill  other  poly-
       gons.   Fig2dev  may be installed for plotters with or without the IBM-
       GEC.  The -c option selects the alternate instruction set.

OPTIONS COMMON TO ALL BITMAP FORMATS
       -b borderwidth
              Make blank border around figure of width borderwidth.

       -F     Use correct font sizes (points, 1/72 inch) instead of the tradi-
              tional  size  that xfig/fig2dev uses, which is (1/80 inch).  The
              corresponding xfig command-line option is -correct_font_size.

       -g color
              Use color for the background.

       -N     Convert all colors to grayscale.

       -S smoothfactor
              This  will  smooth  the  output  by  passing   smoothfactor   to
              ghostscript   in  the  -dTextAlphaBits  and  -dGraphicsAlphaBits
              options to improve font  rendering  and  graphic  smoothing.   A
              value  of  2 for smoothfactor provides some smoothing and 4 pro-
              vides more.

GIF OPTIONS
       -t color
              Use color for the transparent color in the GIF file.  This  must
              be  specified in the same format that ppmmake(1) allows.  It may
              allow an X11 color name, but at least you may  use  a  six-digit
              hexadecimal RGBvalue using the # sign, e.g. #ff0000 (Red).

JPEG OPTIONS
       -q image_quality
              use  the integer value image_quality for the JPEG "Quality" fac-
              tor.  Valid values are 0-100, with the default being 75.

LATEX OPTIONS
       -d dmag
              Set a separate magnification for the length of  line  dashes  to
              dmag.

       -E num Set  encoding  for  latex  text translation (0 no translation, 1
              ISO-8859-1, 2 ISO-8859-2)

       -l lwidth
              Sets the threshold between LaTeX thin and thick lines to  lwidth
              pixels.   LaTeX  supports  only two different line width: \thin-
              lines and \thicklines.  Lines of width greater than lwidth  pix-
              els  are drawn as \thicklines.  Also affects the size of dots in
              dotted line style.  The default is 1.

       -v     Verbose mode.

       LaTeX cannot accurately represent all the graphics objects which can be
       described  by  Fig.   For  example, the possible slopes which lines may
       have are limited.  Some objects, such as spline curves, cannot be drawn
       at  all.  Fig2latex chooses the closest possible line slope, and prints
       error messages when objects cannot be drawn accurately

MAP (HTML image map) OPTIONS
       Xfig version 3.2.3 and later saves and allows the user to edit comments
       for  each  Fig object.  The fig2dev map output language will produce an
       HTML image map using Fig objects that  have  href="some_html_reference"
       in their comments.  Any Fig object except compound objects may used for
       this.  Usually, besides generating the map file, you would also  gener-
       ate a PNG file, which is the image to which the map refers.

       For  example,  you may have an xfig drawing with an imported image that
       has the comment href="go_here.html" and a box  object  with  a  comment
       href="go_away.html".  This will produce an image map file such the user
       may click on the image and the browser  will  load  the  "go_here.html"
       page,  or click on the box and the browser will load the "go_away.html"
       page.

       After the map file is generated by fig2dev you will need to edit it  to
       fill out any additional information it may need.

       -b borderwidth
              Make blank border around figure of width borderwidth.

METAFONT OPTIONS
       fig2dev  scales the figure by 1/8 before generating METAFONT code.  The
       magnification can be further changed with the -m option  or  by  giving
       magnification options to mf.

       In  order to process the generated METAFONT code, the mfpic macros must
       be installed where mf can find them. The mfpic macro package is  avail-
       able at any CTAN cite under the subdirectory: graphics/mfpic

       -C code
              specifies the starting METAFONT font code. The default is 32.

       -n name
              specifies the name to use in the output file.

       -p pen_magnification
              specifies  how  much the line width should be magnified compared
              to the original figure. The default is 1.

       -t top specifies the top of the whole coordinate system. The default is
              ypos.

       -x xmin
              specifies the minimum x coordinate value of the figure (inches).
              The default is 0.

       -y ymin
              specifies the minumum y coordinate value of the figure (inches).
              The default is 0.

       -X xmax
              specifies the maximum x coordinate value of the figure (inches).
              The default is 8.

       -Y ymax
              specifies the maximum y coordinate value of the figure (inches).
              The default is 8.

METAPOST OPTIONS
       -i file
              Include file content via \input-command.

       -I file
              Include file content as additional header.

       -o     Old mode (no latex).

       -p number
              Adds the line "prologues:=number" to the output.

PIC OPTIONS
       -p ext Enables  the  use  of  certain PIC extensions which are known to
              work with the groff  package;  compatibility  with  DWB  PIC  is
              unknown.  The extensions enabled by each option are:

           arc     Allow ARC_BOX i.e. use rounded corners
           line    Use the 'line_thickness' value
           fill    Allow ellipses to be filled
           all     Use all of the above
           psfont  Don't convert Postscript fonts generic type
                   (useful for files going to be Ditroff'ed for
                   and printed on PS printer). DWB-compatible.
           allps   Use all of the above (i.e. "all" + "psfont")

PICTEX OPTIONS
       In order to include PiCTeX pictures into a document, it is necessary to
       load the PiCTeX macros.

       PiCTeX uses TeX integer register arithmetic to generate curves, and  so
       it  is  very slow.  PiCTeX draws curves by \put-ing the psymbol repeat-
       edly, and so requires a large amount of TeX's internal memory, and gen-
       erates  large DVI files.  The size of TeX's memory limits the number of
       plot symbols in a picture.  As a result, it is best to  use  PiCTeX  to
       generate small pictures.

       -E num Set  encoding  for  latex  text translation (0 no translation, 1
              ISO-8859-1, 2 ISO-8859-2)

POSTSCRIPT, ENCAPSULATED POSTSCRIPT (EPS), and PDF OPTIONS
       With PostScript, xfig can be used to create multiple page figures Spec-
       ify  the -M option to produce a multi-page output.  For posters, add -O
       to overlap the pages slightly to get around the problem of the unprint-
       able area in most printers, then cut and paste the pages together.  Due
       to memory limitations of most laser printers,  the  figure  should  not
       have large imported images (bitmaps). Great for text with very big let-
       ters.

       The EPS driver has the following differences from PostScript:
           o No showpage is generated  because  the  output  is  meant  to  be
           imported into another program or document and not printed
           o The landscape/portrait options are ignored
           o The centering option is ignored
           o The multiple-page option is ignored
           o The paper size option is ignored
           o The x/y offset options are ignored

       The EPS driver has the following two special options:

       -B 'Wx [Wy X0 Y0]'
              This specifies that the bounding box of the EPS file should have
              the width Wx and the height Wy.  Note that it doesn't scale  the
              figure  to  this  size,  it  merely sets the bounding box.  If a
              value less than or equal to 0 is specified for Wx or  Wy,  these
              are  set  to the width/height respectively of the figure. Origin
              is relative to screen (0,0) (upper-left).  Wx, Wy, X0 and Y0 are
              interpreted  in  centimeters  or inches depending on the measure
              given in the fig-file.  Remember to put  either  quotes  (")  or
              apostrophes (') to group the arguments to -B.

       -R 'Wx [Wy X0 Y0]'
              Same  as  the -B option except that X0 and Y0 is relative to the
              lower left corner of the figure.  Remember to put either  quotes
              (") or apostrophes (') to group the arguments to -R.

       The PDF driver uses all the PostScript options.

       Text  can  now include various ISO-character codes above 0x7f, which is
       useful for language specific characters to be  printed  directly.   Not
       all ISO-characters are implemented.

       Color support: Colored objects created by Fig can be printed on a color
       postscript printer. There are 32 standard colors: black, yellow, white,
       gold,  five  shades of blue, four shades of green, four shades of cyan,
       four shades of red, five shades of magenta, four shades of  brown,  and
       four  shades  of pink.  In addition there may be user-defined colors in
       the file.  See the xfig FORMAT3.2 file for the definition of these col-
       ors.  On a monochrome printer, colored objects will be mapped into dif-
       ferent grayscales by the printer.  Filled objects are printed using the
       given  area  fill and color.  There are 21 "shades" going from black to
       full saturation of the fill color, and 21 more "tints" from full  satu-
       ration  +  1  to  white.   In  addition,  there are 16 patterns such as
       bricks, diagonal lines, crosshatch, etc.

       -A     Add an ASCII (EPSI) preview.

       -b borderwidth
              Make blank border around figure of width borderwidth.
              Not availble in EPS.

       -C dummy_arg
              Add a color *binary* TIFF preview for  Microsoft  products  that
              need  a  binary  preview.   See also -T (monochrome preview).  A
              dummy argument must be supplied for historical reasons.

       -c     option centers the figure on the page.  The centering may not be
              accurate if there are texts in the fig_file that extends too far
              to the right of other objects.

       -e     option puts the figure against the edge (not  centered)  of  the
              page.  Not availble in EPS.

       -F     Use  correct font sizes (points) instead of the traditional size
              that xfig/fig2dev uses, which is 1/80 inch.   The  corresponding
              xfig command-line option is -correct_font_size.

       -g color
              Use color for the background.

       -l dummy_arg
              Generate  figure  in  landscape  mode.   The  dummy  argument is
              ignored, but must appear on the command line for reasons of com-
              patibility.   This option will override the orientation specifi-
              cation in the file (for file versions 3.0 and higher).
              Not availble in EPS.

       -M     Generate multiple pages if figure exceeds paper size.
              Not availble in EPS.

       -N     Convert all colors to grayscale.

       -n name
              Set the Title part of the PostScript output to  name.   This  is
              useful when the input to fig2dev comes from standard input.

       -O     When used with -M, overlaps the pages slightly to get around the
              problem of the unprintable area in most printers.
              Not availble in EPS.

       -p dummy_arg
              Generate  figure  in  portrait  mode.   The  dummy  argument  is
              ignored, but must appear on the command line for reasons of com-
              patibility.  This option will override the orientation  specifi-
              cation  in the file (for file versions 3.0 and higher).  This is
              the default for Fig files of version 2.1 or lower.
              Not availble in EPS.

       -T     Add a monochrome *binary* TIFF preview  for  Microsoft  products
              that need a binary preview.  See also -C (color preview).

       -x offset
              shift the figure in the X direction by offset units (1/72
              inch).  A negative value shifts the figure  to  the  left
              and a positive value to the right.
              Not availble in EPS.

       -y offset
              shift the figure in the Y direction by offset units (1/72
              inch).  A negative value shifts the figure up and a posi-
              tive value down.
              Not availble in EPS.

       -z papersize
              Sets the papersize.  Not availble in EPS.
              Available paper sizes are:
                  "Letter" (8.5" x 11" also "A"),
                  "Legal" (11" x 14")
                  "Ledger" (11" x 17"),
                  "Tabloid" (17" x 11", really Ledger in Landscape mode),
                  "A" (8.5" x 11" also "Letter"),
                  "B" (11" x 17" also "Ledger"),
                  "C" (17" x 22"),
                  "D" (22" x 34"),
                  "E" (34" x 44"),
                  "A4" (21  cm x  29.7cm),
                  "A3" (29.7cm x  42  cm),
                  "A2" (42  cm x  59.4cm),
                  "A1" (59.4cm x  84.1cm),
                  "A0" (84.1cm x 118.9cm),
                  and "B5" (18.2cm x 25.7cm).

PSTEX OPTIONS
       The pstex language is a variant of ps which suppresses formatted
       (special) text.  The  pstex_t  language  has  the  complementary
       behavior:  it generates only the LaTeX special text and the com-
       mands necessary to position special text,  and  to  overlay  the
       PostScript file generated using pstex.  These two drivers can be
       used to generate a figure  which  combines  the  flexibility  of
       PostScript  graphics with LaTeX text formatting of special text.

       -F     Use correct font sizes (points)  instead  of  the  tradi-
              tional  size  that xfig/fig2dev uses, which is 1/80 inch.
              The  corresponding  xfig  command-line  option  is  -cor-
              rect_font_size.

       -g color
              Use color for the background.

       -n name
              sets  the  Title  part  of the PostScript output to name.
              This is useful when the input to fig2dev comes from stan-
              dard input.

PSTEX_T OPTIONS
       The  pstex_t  language  produces only the LaTeX special text and
       the commands necessary to position special text, and to  overlay
       the PostScript file generated using pstex.  (see above)

       -E num Set  encoding  for  latex text translation (0 no transla-
              tion, 1 ISO-8859-1, 2 ISO-8859-2)

       -F     Don't set the font face, series, and style; only set it's
              size and the baselineskip. By default, fig2dev sets all 5
              font parameters when it puts some text. The  disadvantage
              is  that you can't set the font from your LaTeX document.
              With this option on, you can set the font from your LaTeX
              document (like "\sfshape \input picture.eepic").

       -p file
              specifies the name of the PostScript file to be overlaid.
              If not set or its value is null then no PS file  will  be
              inserted.

TK and PTK OPTIONS (tcl/tk and Perl/tk)
       -l dummy_arg
              Generate figure in landscape mode.  The dummy argument is
              ignored, but must appear on the command line for  reasons
              of compatibility.  This option will override the orienta-
              tion specification in the file (for file versions 3.0 and
              higher).

       -p dummy_arg
              Generate  figure in portrait mode.  The dummy argument is
              ignored, but must appear on the command line for  reasons
              of compatibility.  This option will override the orienta-
              tion specification in the file (for file versions 3.0 and
              higher).   This  is  the default for Fig files of version
              2.1 or lower.

       -P     Generate canvas of full page size instead  of  using  the
              bounding  box  of the figure's objects. The default is to
              use only the bounding box.

       -z papersize
              Sets the  papersize.   See  the  POSTSCRIPT  OPTIONS  for
              available  paper  sizes.   This  is only used when the -P
              option (use full page) is used.

SEE ALSO
       [x]fig(1), pic(1) pic2fig(1), transfig(1)

BUGS and RESTRICTIONS
       Please send bug reports, fixes, new features etc. to:
       xfig-bugs@epb1.lbl.gov (Brian V. Smith)

       Arc-boxes are not supported for the tk output language, and only
       X bitmap pictures are supported because of the canvas limitation
       in tk.

       Picture objects are not scaled with the magnification factor for
       tk output.

       Because  tk scales canvas items according to the X display reso-
       lution, polygons, lines, etc. may  be  scaled  differently  than
       imported pictures (bitmaps) which aren't scaled at all.

       Rotated  text  is  only  supported  in  the  IBM-GL  (HP/GL) and
       PostScript (including eps) languages.

COPYRIGHT
       Copyright (c) 1991 Micah Beck
       Parts Copyright (c) 1985 Supoj Sutantavibul
       Parts Copyright (c) 1989-1999 Brian V. Smith

       Permission to use, copy, modify, distribute, and sell this soft-
       ware  and  its  documentation  for any purpose is hereby granted
       without fee, provided that the above copyright notice appear  in
       all  copies and that both that copyright notice and this permis-
       sion notice appear in supporting documentation. The authors make
       no  representations  about  the suitability of this software for
       any purpose.  It is provided "as is" without express or  implied
       warranty.

       THE  AUTHORS  DISCLAIM  ALL WARRANTIES WITH REGARD TO THIS SOFT-
       WARE, INCLUDING ALL IMPLIED WARRANTIES  OF  MERCHANTABILITY  AND
       FITNESS,  IN  NO  EVENT SHALL THE AUTHORS BE LIABLE FOR ANY SPE-
       CIAL, INDIRECT OR CONSEQUENTIAL DAMAGES OR ANY  DAMAGES  WHATSO-
       EVER  RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
       ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING
       OUT  OF  OR  IN  CONNECTION  WITH THE USE OR PERFORMANCE OF THIS
       SOFTWARE.

AUTHORS
       Micah Beck
       Cornell University
       Sept 28 1990

       and Frank Schmuck (then of Cornell University)
       and Conrad Kwok (then of U.C. Davis).

       drivers contributed by
       Jose Alberto Fernandez R. (U. of Maryland)
       and Gary Beihl (MCC)

       Color support, ISO-character encoding and poster support by
       Herbert Bauer (heb@regent.e-technik.tu-muenchen.de)

       Modified from f2p (fig to PIC), by the author of Fig
       Supoj Sutanthavibul (supoj@sally.utexas.edu)
       University of Texas at Austin.

       MetaFont driver by
       Anthony Starks (ajs@merck.com)

       X-splines code by
       Carole Blanc (blanc@labri.u-bordeaux.fr)
       Christophe Schlick (schlick@labri.u-bordeaux.fr)
       The initial implementation was done by C. Feuille,  S.  Grobois,
       L. Maziere and L. Minihot as a student practice (Universite Bor-
       deaux, France).

       Japanese text support  for  LaTeX  output  written  by  T.  Sato
       (VEF00200@niftyserve.or.jp)

       The tk driver was written by
       Mike  Markowski  (mm@udel.edu)  with  a little touch-up by Brian
       Smith

       The CGM driver (Computer Graphics Metafile) was written by
       Philippe Bekaert (Philippe.Bekaert@cs.kuleuven.ac.be)

       The EMF driver (Enhanced Metafile) was written by
       Michael Schrick (m_schrick@hotmail.com)

                            Version 3.2.5 Feb 2007                  FIG2DEV(1)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=fig2dev
Gedruckt am: 11.12.2017 01:08 GMT+0100 (2017-12-11T01:08:38+01:00)