UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
Gnu(3)                User Contributed Perl Documentation               Gnu(3)

       Term::ReadLine::Gnu - Perl extension for the GNU Readline/History

         use Term::ReadLine;
         $term = new Term::ReadLine 'ProgramName';
         while ( defined ($_ = $term->readline('prompt>')) ) {

       This is an implementation of Term::ReadLine using the GNU
       Readline/History Library.

       For basic functions object oriented interface is provided. These are
       described in the section "Standard Methods" and ""Term::ReadLine::Gnu"

       This package also has the interface with the almost all functions and
       variables which are documented in the GNU Readline/History Library
       Manual.  They are documented in the section ""Term::ReadLine::Gnu"
       Functions" and ""Term::ReadLine::Gnu" Variables" briefly.  For more
       detail of the GNU Readline/History Library, see 'GNU Readline Library
       Manual' and 'GNU History Library Manual'.

       The sample programs under "eg/" directory and test programs under "t/"
       directory in the "Term::ReadLine::Gnu" distribution include many
       example of this module.

   Standard Methods
       These methods are standard methods defined by Term::ReadLine.

           returns the actual package that executes the commands. If you have
           installed this package,  possible value is "Term::ReadLine::Gnu".

           returns the handle for subsequent calls to following functions.
           Argument is the name of the application.  Optionally can be
           followed by two arguments for "IN" and "OUT" file handles. These
           arguments should be globs.

           gets an input line, with actual "GNU Readline" support.  Trailing
           newline is removed.  Returns "undef" on "EOF".  "PREPUT" is an
           optional argument meaning the initial value of input.

           The optional argument "PREPUT" is granted only if the value
           "preput" is in "Features".

           "PROMPT" may include some escape sequences.  Use
           "RL_PROMPT_START_IGNORE" to begin a sequence of non-printing
           characters, and "RL_PROMPT_END_IGNORE" to end of such a sequence.

       "AddHistory(LINE1, LINE2, ...)"
           adds the lines to the history of input, from where it can be used
           if the actual "readline" is present.

       "IN", "OUT"
           return the file handles for input and output or "undef" if
           "readline" input and output cannot be used for Perl.

           If argument "MAX" is specified, it is an advice on minimal size of
           line to be included into history.  "undef" means do not include
           anything into history.  Returns the old value.

           returns an array with two strings that give most appropriate names
           for files for input and output using conventions "<$in", ">$out".

           returns a reference to a hash which describes internal
           configuration (variables) of the package.  Names of keys in this
           hash conform to standard conventions with the leading "rl_"

           See section "Variables" for supported variables.

           Returns a reference to a hash with keys being features present in
           current implementation. Several optional features are used in the
           minimal interface: "appname" should be present if the first
           argument to "new" is recognized, and "minline" should be present if
           "MinLine" method is not dummy.  "autohistory" should be present if
           lines are put into history automatically (maybe subject to
           "MinLine"), and "addHistory" if "AddHistory" method is not dummy.
           "preput" means the second argument to "readline" method is
           processed.  "getHistory" and "setHistory" denote that the
           corresponding methods are present. "tkRunning" denotes that a Tk
           application may run while ReadLine is getting input.

   "Term::ReadLine::Gnu" Functions
       All these GNU Readline/History Library functions are callable via
       method interface and have names which conform to standard conventions
       with the leading "rl_" stripped.

       Almost methods have lower level functions in "Term::ReadLine::Gnu::XS"
       package.  To use them full qualified name is required.  Using method
       interface is preferred.

       Readline Convenience Functions
           Naming Function
               "add_defun(NAME, FUNC [,KEY=-1])"
                   Add name to the Perl function "FUNC".  If optional argument
                   "KEY" is specified, bind it to the "FUNC".  Returns
                   reference to "FunctionPtr".

                           # name name `reverse-line' to a function reverse_line(),
                           # and bind it to "\C-t"
                           $term->add_defun('reverse-line', \&reverse_line, ord "\ct");

           Selecting a Keymap
                           Keymap  rl_make_bare_keymap()

                           Keymap  rl_copy_keymap(Keymap|str map)

                           Keymap  rl_make_keymap()

                           Keymap  rl_discard_keymap(Keymap|str map)

                           Keymap  rl_get_keymap()

                           Keymap  rl_set_keymap(Keymap|str map)

                           Keymap  rl_get_keymap_by_name(str name)

                           str     rl_get_keymap_name(Keymap map)

           Binding Keys
               "bind_key(KEY, FUNCTION [,MAP])"
                           int     rl_bind_key(int key, FunctionPtr|str function,
                                               Keymap|str map = rl_get_keymap())

                   Bind "KEY" to the "FUNCTION".  "FUNCTION" is the name added
                   by the "add_defun" method.  If optional argument "MAP" is
                   specified, binds in "MAP".  Returns non-zero in case of

               "bind_key_if_unbound(KEY, FUNCTION [,MAP])"
                           int     rl_bind_key_if_unbound(int key, FunctionPtr|str function,
                                                          Keymap|str map = rl_get_keymap()) #GRL5.0

               "unbind_key(KEY [,MAP])"
                           int     rl_unbind_key(int key, Keymap|str map = rl_get_keymap())

                   Bind "KEY" to the null function.  Returns non-zero in case
                   of error.

               "unbind_function(FUNCTION [,MAP])"
                           int     rl_unbind_function(FunctionPtr|str function,
                                                      Keymap|str map = rl_get_keymap())

               "unbind_command(COMMAND [,MAP])"
                           int     rl_unbind_command(str command,
                                                     Keymap|str map = rl_get_keymap())

               "bind_keyseq(KEYSEQ, FUNCTION [,MAP])"
                           int     rl_bind_keyseq(str keyseq, FunctionPtr|str function,
                                                  Keymap|str map = rl_get_keymap()) # GRL 5.0

               "set_key(KEYSEQ, FUNCTION [,MAP])"
                           int     rl_set_key(str keyseq, FunctionPtr|str function,
                                              Keymap|str map = rl_get_keymap())

               "bind_keyseq_if_unbound(KEYSEQ, FUNCTION [,MAP])"
                           int     rl_bind_keyseq_if_unbound(str keyseq, FunctionPtr|str function,
                                                             Keymap|str map = rl_get_keymap()) # GRL 5.0

               "generic_bind(TYPE, KEYSEQ, DATA, [,MAP])"
                           int     rl_generic_bind(int type, str keyseq,
                                                   FunctionPtr|Keymap|str data,
                                                   Keymap|str map = rl_get_keymap())

                           void    rl_parse_and_bind(str line)

                   Parse "LINE" as if it had been read from the ~/.inputrc
                   file and perform any key bindings and variable assignments
                   found.  For more detail see 'GNU Readline Library Manual'.

                           int     rl_read_init_file(str filename = '~/.inputrc')

           Associating Function Names and Bindings
                           FunctionPtr rl_named_function(str name)

                           str     rl_get_function_name(FunctionPtr function)

               "function_of_keyseq(KEYMAP [,MAP])"
                           (FunctionPtr|Keymap|str data, int type)
                                   rl_function_of_keyseq(str keyseq,
                                                         Keymap|str map = rl_get_keymap())

               "invoking_keyseqs(FUNCTION [,MAP])"
                           (@str)  rl_invoking_keyseqs(FunctionPtr|str function,
                                                       Keymap|str map = rl_get_keymap())

                           void    rl_function_dumper(int readable = 0)

                           void    rl_list_funmap_names()

                           (@str)  rl_funmap_names()

               "add_funmap_entry(NAME, FUNCTION)"
                           int     rl_add_funmap_entry(char *name, FunctionPtr|str function)

           Allowing Undoing
                           int     rl_begin_undo_group()

                           int     rl_end_undo_group()

               "add_undo(WHAT, START, END, TEXT)"
                           int     rl_add_undo(int what, int start, int end, str text)

                           void    rl_free_undo_list()

                           int     rl_do_undo()

               "modifying([START [,END]])"
                           int     rl_modifying(int start = 0, int end = rl_end)

                           void    rl_redisplay()

                           int     rl_forced_update_display()

                           int     rl_on_new_line()

                           int     rl_on_new_line_with_prompt()    # GRL 4.1

                           int     rl_reset_line_state()

                           int     rl_show_char(int c)

               "message(FMT[, ...])"
                           int     rl_message(str fmt, ...)

                           int     rl_crlf()                       # GRL 4.2

                           int     rl_clear_message()

                           void    rl_save_prompt()

                           void    rl_restore_prompt()

                           int     rl_expand_prompt(str prompt)    # GRL 4.2

                           int     rl_set_prompt(const str prompt) # GRL 4.2

           Modifying Text
                           int     rl_insert_text(str text)

               "delete_text([START [,END]])"
                           int     rl_delete_text(int start = 0, int end = rl_end)

               "copy_text([START [,END]])"
                           str     rl_copy_text(int start = 0, int end = rl_end)

               "kill_text([START [,END]])"
                           int     rl_kill_text(int start = 0, int end = rl_end)

                           int     rl_push_macro_input(str macro)

           Character Input
                           int     rl_read_key()

                           int     rl_getc(FILE *STREAM)

                           int     rl_stuff_char(int c)

                           int     rl_execute_next(int c)          # GRL 4.2

                           int     rl_clear_pending_input()        # GRL 4.2

                           int     rl_set_keyboard_input_timeout(int usec) # GRL 4.2

           Terminal Management
                           void    rl_prep_terminal(int META_FLAG) # GRL 4.2

                           void    rl_deprep_terminal()            # GRL 4.2

                           void    rl_tty_set_default_bindings([Keymap KMAP])      # GRL 4.2

                           void    rl_tty_unset_default_bindings([Keymap KMAP])    # GRL 5.0

                           int     rl_reset_terminal(str terminal_name = getenv($TERM)) # GRL 4.2

           Utility Functions
               "replace_line(TEXT [,CLEAR_UNDO]"
                           int     rl_replace_line(str text, int clear_undo)       # GRL 4.3

                           int     rl_initialize()

                           int     rl_ding()

                           int     rl_alphabetic(int C)

               "display_match_list(MATCHES [,LEN [,MAX]])"
                           void    rl_display_match_list(\@matches, len = $#maches, max) # GRL 4.0

                   Since the first element of an array @matches as treated as
                   a possible completion, it is not displayed.  See the
                   descriptions of "completion_matches()".

                   When "MAX" is ommited, the max length of an item in
                   @matches is used.

           Miscellaneous Functions
               "macro_bind(KEYSEQ, MACRO [,MAP])"
                           int     rl_macro_bind(const str keyseq, const str macro, Keymap map)

                           int     rl_macro_dumper(int readline)

               "variable_bind(VARIABLE, VALUE)"
                           int     rl_variable_bind(const str variable, const str value)

                           str     rl_variable_value(const str variable)   # GRL 5.1

                           int     rl_variable_dumper(int readline)

                           int     rl_set_paren_blink_timeout(usec)        # GRL 4.2

                           str     rl_get_termcap(cap)

           Alternate Interface
               "callback_handler_install(PROMPT, LHANDLER)"
                           void    rl_callback_handler_install(str prompt, pfunc lhandler)

                           void    rl_callback_read_char()

                           void    rl_callback_handler_remove()

       Readline Signal Handling
                       void    rl_cleanup_after_signal()       # GRL 4.0

                       void    rl_free_line_state()    # GRL 4.0

                       void    rl_reset_after_signal() # GRL 4.0

                       void    rl_resize_terminal()    # GRL 4.0

           "set_screen_size(ROWS, COLS)"
                       void    rl_set_screen_size(int ROWS, int COLS)  # GRL 4.2

                       (int rows, int cols)    rl_get_screen_size()    # GRL 4.2

                       void    rl_reset_screen_size()  # GRL 5.1

                       int     rl_set_signals()        # GRL 4.0

                       int     rl_clear_signals()      # GRL 4.0

       Completion Functions
                       int     rl_complete_internal(int what_to_do = TAB)

                       int     rl_completion_mode(FunctionPtr|str function)

           "completion_matches(TEXT [,FUNC])"
                       (@str)  rl_completion_matches(str text,
                                                     pfunc func = filename_completion_function)

           "filename_completion_function(TEXT, STATE)"
                       str     rl_filename_completion_function(str text, int state)

           "username_completion_function(TEXT, STATE)"
                       str     rl_username_completion_function(str text, int state)

           "list_completion_function(TEXT, STATE)"
                       str     list_completion_function(str text, int state)

       History Functions
           Initializing History and State Management
                           void    using_history()

           History List Management
               "addhistory(STRING[, STRING, ...])"
                           void    add_history(str string)

                           int     stifle_history(int max|undef)

                   stifles the history list, remembering only the last "MAX"
                   entries.  If "MAX" is undef, remembers all entries.  This
                   is a replacement of unstifle_history().

                           int     unstifle_history()

                   This is equivalent with 'stifle_history(undef)'.

               "SetHistory(LINE1 [, LINE2, ...])"
                   sets the history of input, from where it can be used if the
                   actual "readline" is present.

                           void    add_history_time(str string)    # GRL 5.0

                           str     remove_history(int which)

               "replace_history_entry(WHICH, LINE)"
                           str     replace_history_entry(int which, str line)

                           void    clear_history()

                           int     history_is_stifled()

           Information About the History List
                           int     where_history()

                           str     current_history()

                           str     history_get(offset)

                           time_t  history_get_time(offset)

                           int     history_total_bytes()

                   returns the history of input as a list, if actual
                   "readline" is present.

           Moving Around the History List
                           int     history_set_pos(int pos)

                           str     previous_history()

                           str     next_history()

           Searching the History List
               "history_search(STRING [,DIRECTION])"
                           int     history_search(str string, int direction = -1)

               "history_search_prefix(STRING [,DIRECTION])"
                           int     history_search_prefix(str string, int direction = -1)

               "history_search_pos(STRING [,DIRECTION [,POS]])"
                           int     history_search_pos(str string,
                                                      int direction = -1,
                                                      int pos = where_history())

           Managing the History File
               "ReadHistory([FILENAME [,FROM [,TO]]])"
                           int     read_history(str filename = '~/.history',
                                                int from = 0, int to = -1)

                           int     read_history_range(str filename = '~/.history',
                                                      int from = 0, int to = -1)

                   adds the contents of "FILENAME" to the history list, a line
                   at a time.  If "FILENAME" is false, then read from
                   ~/.history.  Start reading at line "FROM" and end at "TO".
                   If "FROM" is omitted or zero, start at the beginning.  If
                   "TO" is omitted or less than "FROM", then read until the
                   end of the file.  Returns true if successful, or false if
                   not.  "read_history()" is an aliase of

                           int     write_history(str filename = '~/.history')

                   writes the current history to "FILENAME", overwriting
                   "FILENAME" if necessary.  If "FILENAME" is false, then
                   write the history list to ~/.history.  Returns true if
                   successful, or false if not.

               "append_history(NELEMENTS [,FILENAME])"
                           int     append_history(int nelements, str filename = '~/.history')

               "history_truncate_file([FILENAME [,NLINES]])"
                           int     history_truncate_file(str filename = '~/.history',
                                                         int nlines = 0)

           History Expansion
                           (int result, str expansion) history_expand(str line)

                   Note that this function returns "expansion" in scalar

               "get_history_event(STRING, CINDEX [,QCHAR])"
                           (str text, int cindex) = get_history_event(str  string,
                                                                      int  cindex,
                                                                      char qchar = '\0')

                           (@str)  history_tokenize(str line)

               "history_arg_extract(LINE, [FIRST [,LAST]])"
                           str history_arg_extract(str line, int first = 0, int last = '$')

   "Term::ReadLine::Gnu" Variables
       Following GNU Readline/History Library variables can be accessed from
       Perl program.  See 'GNU Readline Library Manual' and ' GNU History
       Library Manual' for each variable.  You can access them with "Attribs"
       methods.  Names of keys in this hash conform to standard conventions
       with the leading "rl_" stripped.


           $attribs = $term->Attribs;
           $v = $attribs->{library_version};   # rl_library_version
           $v = $attribs->{history_base};      # history_base

       Readline Variables
                   str rl_line_buffer
                   int rl_point
                   int rl_end
                   int rl_mark
                   int rl_done
                   int rl_num_chars_to_read (GRL 4.2)
                   int rl_pending_input
                   int rl_dispatching (GRL 4.2)
                   int rl_erase_empty_line (GRL 4.0)
                   str rl_prompt (read only)
                   int rl_already_prompted (GRL 4.1)
                   str rl_library_version (read only)
                   int rl_readline_version (read only)
                   int rl_gnu_readline_p (GRL 4.2)
                   str rl_terminal_name
                   str rl_readline_name
                   filehandle rl_instream
                   filehandle rl_outstream
                   int rl_prefer_env_winsize (GRL 5.1)
                   pfunc rl_last_func (GRL 4.2)
                   pfunc rl_startup_hook
                   pfunc rl_pre_input_hook (GRL 4.0)
                   pfunc rl_event_hook
                   pfunc rl_getc_function
                   pfunc rl_redisplay_function
                   pfunc rl_prep_term_function (GRL 4.2)
                   pfunc rl_deprep_term_function (GRL 4.2)
                   Keymap rl_executing_keymap (read only)
                   Keymap rl_binding_keymap (read only)
                   str rl_executing_macro (GRL 4.2)
                   int rl_readline_state (GRL 4.2)
                   int rl_explicit_arg (GRL 4.2)
                   int rl_numeric_arg (GRL 4.2)
                   int rl_editing_mode (GRL 4.2)

       Signal Handling Variables
                   int rl_catch_signals (GRL 4.0)
                   int rl_catch_sigwinch (GRL 4.0)

       Completion Variables
                   pfunc rl_completion_entry_function
                   pfunc rl_attempted_completion_function
                   pfunc rl_filename_quoting_function
                   pfunc rl_filename_dequoting_function
                   pfunc rl_char_is_quoted_p
                   int rl_completion_query_items
                   str rl_basic_word_break_characters
                   str rl_basic_quote_characters
                   str rl_completer_word_break_characters
                   pfunc rl_completion_word_break_hook (GRL 5.0)
                   str rl_completer_quote_characters
                   str rl_filename_quote_characters
                   str rl_special_prefixes
                   int rl_completion_append_character
                   int rl_completion_suppress_append (GRL 4.3)
                   int rl_completion_quote_charactor (GRL 5.0)
                   int rl_completion_suppress_quote (GRL 5.0)
                   int rl_completion_found_quote (GRL 5.0)
                   int rl_completion_mark_symlink_dirs (GRL 4.3)
                   int rl_ignore_completion_duplicates
                   int rl_filename_completion_desired
                   int rl_filename_quoting_desired
                   int rl_attempted_completion_over (GRL 4.2)
                   int rl_completion_type (GRL 4.2)
                   int rl_inhibit_completion
                   pfunc rl_ignore_some_completion_function
                   pfunc rl_directory_completion_hook
                   pfunc rl_completion_display_matches_hook (GRL 4.0)

       History Variables
                   int history_base
                   int history_length
                   int history_max_entries (called `max_input_history'. read only)
                   int history_write_timestamps (GRL 5.0)
                   char history_expansion_char
                   char history_subst_char
                   char history_comment_char
                   str history_word_delimiters (GRL 4.2)
                   str history_no_expand_chars
                   str history_search_delimiter_chars
                   int history_quotes_inhibit_expansion
                   pfunc history_inhibit_expansion_function

       Function References

   Custom Completion
       In this section variables and functions for custom completion is
       described with examples.

       Most of descriptions in this section is cited from GNU Readline Library

           This variable holds reference refers to a generator function for

           A generator function is called repeatedly from
           "completion_matches()", returning a string each time.  The
           arguments to the generator function are "TEXT" and "STATE".  "TEXT"
           is the partial word to be completed.  "STATE" is zero the first
           time the function is called, allowing the generator to perform any
           necessary initialization, and a positive non-zero integer for each
           subsequent call.  When the generator function returns "undef" this
           signals "completion_matches()" that there are no more possibilities

           If the value is undef, built-in "filename_completion_function" is

           A sample generator function, "list_completion_function", is defined
           in Gnu.pm.  You can use it as follows;

               use Term::ReadLine;
               my $term = new Term::ReadLine 'sample';
               my $attribs = $term->Attribs;
               $attribs->{completion_entry_function} =
               $attribs->{completion_word} =
                   [qw(reference to a list of words which you want to use for completion)];
               $term->readline("custom completion>");

           See also "completion_matches".

           A reference to an alternative function to create matches.

           The function is called with "TEXT", "LINE_BUFFER", "START", and
           "END".  "LINE_BUFFER" is a current input buffer string.  "START"
           and "END" are indices in "LINE_BUFFER" saying what the boundaries
           of "TEXT" are.

           If this function exists and returns null list or "undef", or if
           this variable is set to "undef", then an internal function
           "rl_complete()" will call the value of
           $rl_completion_entry_function to generate matches, otherwise the
           array of strings returned will be used.

           The default value of this variable is "undef".  You can use it as

               use Term::ReadLine;
               my $term = new Term::ReadLine 'sample';
               my $attribs = $term->Attribs;
               sub sample_completion {
                   my ($text, $line, $start, $end) = @_;
                   # If first word then username completion, else filename completion
                   if (substr($line, 0, $start) =~ /^\s*$/) {
                       return $term->completion_matches($text,
                   } else {
                       return ();
               $attribs->{attempted_completion_function} = \&sample_completion;

       "completion_matches(TEXT, ENTRY_FUNC)"
           Returns an array of strings which is a list of completions for
           "TEXT".  If there are no completions, returns "undef".  The first
           entry in the returned array is the substitution for "TEXT".  The
           remaining entries are the possible completions.

           "ENTRY_FUNC" is a generator function which has two arguments, and
           returns a string.  The first argument is "TEXT".  The second is a
           state argument; it is zero on the first call, and non-zero on
           subsequent calls.  "ENTRY_FUNC" returns a "undef" to the caller
           when there are no more matches.

           If the value of "ENTRY_FUNC" is undef, built-in
           "filename_completion_function" is used.

           "completion_matches" is a Perl wrapper function of an internal
           function "completion_matches()".  See also

           A variable whose content is a reference to a function which returns
           a list of candidates to complete.

           This variable is compatible with "Term::ReadLine::Perl" and very
           easy to use.

               use Term::ReadLine;
               my $term = new Term::ReadLine 'sample';
               my $attribs = $term->Attribs;
               $attribs->{completion_function} = sub {
                   my ($text, $line, $start) = @_;
                   return qw(a list of candidates to complete);

       "list_completion_function(TEXT, STATE)"
           A sample generator function defined by "Term::ReadLine::Gnu".
           Example code at "rl_completion_entry_function" shows how to use
           this function.

   "Term::ReadLine::Gnu" Specific Features
       "Term::ReadLine::Gnu" Specific Functions
           "CallbackHandlerInstall(PROMPT, LHANDLER)"
               This method provides the function
               "rl_callback_handler_install()" with the following addtional
               feature compatible with "readline" method; ornament feature,
               "Term::ReadLine::Perl" compatible completion function, histroy
               expansion, and addition to history buffer.

           "call_function(FUNCTION, [COUNT [,KEY]])"
                       int     rl_call_function(FunctionPtr|str function, count = 1, key = -1)

               Returns a list of all function names.

               A redisplay function for password input.  You can use it as

                       $attribs->{redisplay_function} = $attribs->{shadow_redisplay};
                       $line = $term->readline("password> ");

               Returns candidates of filename to complete.  This function can
               be used with "completion_function" and is implemented for the
               compatibility with "Term::ReadLine::Perl".

               See the description of section "Custom Completion".

       "Term::ReadLine::Gnu" Specific Variables
               When true, the history expansion is enabled.  By default false.

               See the description of section "Custom Completion".

               A reference to a list of candidates to complete for

       "Term::ReadLine::Gnu" Specific Commands
               The equivalent of the Bash "history-expand-line" editing

               The equivalent of the Korn shell
               "operate-and-get-next-history-line" editing command and the
               Bash "operate-and-get-next".

               This command is bound to "\C-o" by default for the
               compatibility with the Bash and "Term::ReadLine::Perl".

               Shows the version of "Term::ReadLine::Gnu" and the one of the
               GNU Readline Library.

               Change ornaments interactively.

           Readline init file.  Using this file it is possible that you would
           like to use a different set of key bindings.  When a program which
           uses the Readline library starts up, the init file is read, and the
           key bindings are set.

           Conditional key binding is also available.  The program name which
           is specified by the first argument of "new" method is used as the
           application construct.

           For example, when your program call "new" method like this;

                   $term = new Term::ReadLine 'PerlSh';

           your ~/.inputrc can define key bindings only for it as follows;

                   $if PerlSh
                   Meta-Rubout: backward-kill-word
                   "\C-x\C-r": re-read-init-file
                   "\e[11~": "Function Key 1"


       GNU Readline Library Manual
       GNU History Library Manual
       "Term::ReadLine::Perl" (Term-ReadLine-Perl-xx.tar.gz)
       eg/* and t/* in the Term::ReadLine::Gnu distribution
       Articles related to Term::ReadLine::Gnu
           effective perl programming

               This article demonstrates how to integrate Term::ReadLine::Gnu
               into an interactive command line program.

           eijiro (Japanese)

               A command line interface to Eijiro, Japanese-English dictionary
               service on WWW.

       Works which use Term::ReadLine::Gnu
           Perl Debugger
                       perl -d

           The Perl Shell (psh)

               The Perl Shell is a shell that combines the interactive nature
               of a Unix shell with the power of Perl.

               A programmable completion feature compatible with bash is

           SPP (Synopsys Plus Perl)

               SPP (Synopsys Plus Perl) is a Perl module that wraps around
               Synopsys' shell programs.  SPP is inspired by the original
               dc_perl written by Steve Golson, but it's an entirely new
               implementation.  Why is it called SPP and not dc_perl?  Well,
               SPP was written to wrap around any of Synopsys' shells.

           PFM (Personal File Manager for Unix/Linux)

               Pfm is a terminal-based file manager written in Perl, based on
               PFM.COM for MS-DOS (originally by Paul Culley and Henk de

           The soundgrab

               soundgrab is designed to help you slice up a big long raw audio
               file (by default 44.1 kHz 2 channel signed sixteen bit little
               endian) and save your favorite sections to other files. It does
               this by providing you with a cassette player like command line

           PDL (The Perl Data Language)

               PDL (``Perl Data Language'') gives standard Perl the ability to
               compactly store and speedily manipulate the large N-dimensional
               data arrays which are the bread and butter of scientific

           PIQT (Perl Interactive DBI Query Tool)

               PIQT is an interactive query tool using the Perl DBI database
               interface. It supports ReadLine, provides a built in scripting
               language with a Lisp like syntax, an online help system, and
               uses wrappers to interface to the DBD modules.

           Ghostscript Shell

               It provides a friendly way to play with the Ghostscript
               interpreter, including command history and auto-completion of
               Postscript font names and reserved words.

           vshnu (the New Visual Shell)

               A visual shell and CLI shell supplement.

           If you know any other works which can be listed here, please let me

       Hiroo Hayashi "<hiroo.hayashi@computer.org>"


       GTK+ support in addition to Tk.

       "rl_add_defun()" can define up to 16 functions.

       Ornament feature works only on prompt strings.  It requires very hard
       hacking of "display.c:rl_redisplay()" in GNU Readline library to
       ornament input line.

       "newTTY()" is not tested yet.

perl v5.12.1                      2006-04-01                            Gnu(3)

Scannen Sie den Barcode um die Webseite zu öffnen

Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=Term%3A%3AReadLine%3A%3AGnu
Gedruckt am: 21.09.2017 07:16 GMT+0200 (2017-09-21T07:16:24+02:00)