UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
Storable(3pm)          Perl Programmers Reference Guide          Storable(3pm)

NAME
       Storable - persistence for Perl data structures

SYNOPSIS
        use Storable;
        store \%table, 'file';
        $hashref = retrieve('file');

        use Storable qw(nstore store_fd nstore_fd freeze thaw dclone);

        # Network order
        nstore \%table, 'file';
        $hashref = retrieve('file');   # There is NO nretrieve()

        # Storing to and retrieving from an already opened file
        store_fd \@array, \*STDOUT;
        nstore_fd \%table, \*STDOUT;
        $aryref = fd_retrieve(\*SOCKET);
        $hashref = fd_retrieve(\*SOCKET);

        # Serializing to memory
        $serialized = freeze \%table;
        %table_clone = %{ thaw($serialized) };

        # Deep (recursive) cloning
        $cloneref = dclone($ref);

        # Advisory locking
        use Storable qw(lock_store lock_nstore lock_retrieve)
        lock_store \%table, 'file';
        lock_nstore \%table, 'file';
        $hashref = lock_retrieve('file');

DESCRIPTION
       The Storable package brings persistence to your Perl data structures
       containing SCALAR, ARRAY, HASH or REF objects, i.e. anything that can
       be conveniently stored to disk and retrieved at a later time.

       It can be used in the regular procedural way by calling "store" with a
       reference to the object to be stored, along with the file name where
       the image should be written.

       The routine returns "undef" for I/O problems or other internal error, a
       true value otherwise. Serious errors are propagated as a "die"
       exception.

       To retrieve data stored to disk, use "retrieve" with a file name.  The
       objects stored into that file are recreated into memory for you, and a
       reference to the root object is returned. In case an I/O error occurs
       while reading, "undef" is returned instead. Other serious errors are
       propagated via "die".

       Since storage is performed recursively, you might want to stuff
       references to objects that share a lot of common data into a single
       array or hash table, and then store that object. That way, when you
       retrieve back the whole thing, the objects will continue to share what
       they originally shared.

       At the cost of a slight header overhead, you may store to an already
       opened file descriptor using the "store_fd" routine, and retrieve from
       a file via "fd_retrieve". Those names aren't imported by default, so
       you will have to do that explicitly if you need those routines.  The
       file descriptor you supply must be already opened, for read if you're
       going to retrieve and for write if you wish to store.

               store_fd(\%table, *STDOUT) || die "can't store to stdout\n";
               $hashref = fd_retrieve(*STDIN);

       You can also store data in network order to allow easy sharing across
       multiple platforms, or when storing on a socket known to be remotely
       connected. The routines to call have an initial "n" prefix for network,
       as in "nstore" and "nstore_fd". At retrieval time, your data will be
       correctly restored so you don't have to know whether you're restoring
       from native or network ordered data.  Double values are stored
       stringified to ensure portability as well, at the slight risk of
       loosing some precision in the last decimals.

       When using "fd_retrieve", objects are retrieved in sequence, one object
       (i.e. one recursive tree) per associated "store_fd".

       If you're more from the object-oriented camp, you can inherit from
       Storable and directly store your objects by invoking "store" as a
       method. The fact that the root of the to-be-stored tree is a blessed
       reference (i.e. an object) is special-cased so that the retrieve does
       not provide a reference to that object but rather the blessed object
       reference itself. (Otherwise, you'd get a reference to that blessed
       object).

MEMORY STORE
       The Storable engine can also store data into a Perl scalar instead, to
       later retrieve them. This is mainly used to freeze a complex structure
       in some safe compact memory place (where it can possibly be sent to
       another process via some IPC, since freezing the structure also
       serializes it in effect). Later on, and maybe somewhere else, you can
       thaw the Perl scalar out and recreate the original complex structure in
       memory.

       Surprisingly, the routines to be called are named "freeze" and "thaw".
       If you wish to send out the frozen scalar to another machine, use
       "nfreeze" instead to get a portable image.

       Note that freezing an object structure and immediately thawing it
       actually achieves a deep cloning of that structure:

           dclone(.) = thaw(freeze(.))

       Storable provides you with a "dclone" interface which does not create
       that intermediary scalar but instead freezes the structure in some
       internal memory space and then immediately thaws it out.

ADVISORY LOCKING
       The "lock_store" and "lock_nstore" routine are equivalent to "store"
       and "nstore", except that they get an exclusive lock on the file before
       writing.  Likewise, "lock_retrieve" does the same as "retrieve", but
       also gets a shared lock on the file before reading.

       As with any advisory locking scheme, the protection only works if you
       systematically use "lock_store" and "lock_retrieve".  If one side of
       your application uses "store" whilst the other uses "lock_retrieve",
       you will get no protection at all.

       The internal advisory locking is implemented using Perl's flock()
       routine.  If your system does not support any form of flock(), or if
       you share your files across NFS, you might wish to use other forms of
       locking by using modules such as LockFile::Simple which lock a file
       using a filesystem entry, instead of locking the file descriptor.

SPEED
       The heart of Storable is written in C for decent speed. Extra low-level
       optimizations have been made when manipulating perl internals, to
       sacrifice encapsulation for the benefit of greater speed.

CANONICAL REPRESENTATION
       Normally, Storable stores elements of hashes in the order they are
       stored internally by Perl, i.e. pseudo-randomly.  If you set
       $Storable::canonical to some "TRUE" value, Storable will store hashes
       with the elements sorted by their key.  This allows you to compare data
       structures by comparing their frozen representations (or even the
       compressed frozen representations), which can be useful for creating
       lookup tables for complicated queries.

       Canonical order does not imply network order; those are two orthogonal
       settings.

CODE REFERENCES
       Since Storable version 2.05, CODE references may be serialized with the
       help of B::Deparse. To enable this feature, set $Storable::Deparse to a
       true value. To enable deserialization, $Storable::Eval should be set to
       a true value. Be aware that deserialization is done through "eval",
       which is dangerous if the Storable file contains malicious data. You
       can set $Storable::Eval to a subroutine reference which would be used
       instead of "eval". See below for an example using a Safe compartment
       for deserialization of CODE references.

       If $Storable::Deparse and/or $Storable::Eval are set to false values,
       then the value of $Storable::forgive_me (see below) is respected while
       serializing and deserializing.

FORWARD COMPATIBILITY
       This release of Storable can be used on a newer version of Perl to
       serialize data which is not supported by earlier Perls.  By default,
       Storable will attempt to do the right thing, by "croak()"ing if it
       encounters data that it cannot deserialize.  However, the defaults can
       be changed as follows:

       utf8 data
           Perl 5.6 added support for Unicode characters with code points >
           255, and Perl 5.8 has full support for Unicode characters in hash
           keys.  Perl internally encodes strings with these characters using
           utf8, and Storable serializes them as utf8.  By default, if an
           older version of Perl encounters a utf8 value it cannot represent,
           it will "croak()".  To change this behaviour so that Storable
           deserializes utf8 encoded values as the string of bytes
           (effectively dropping the is_utf8 flag) set $Storable::drop_utf8 to
           some "TRUE" value.  This is a form of data loss, because with
           $drop_utf8 true, it becomes impossible to tell whether the original
           data was the Unicode string, or a series of bytes that happen to be
           valid utf8.

       restricted hashes
           Perl 5.8 adds support for restricted hashes, which have keys
           restricted to a given set, and can have values locked to be read
           only.  By default, when Storable encounters a restricted hash on a
           perl that doesn't support them, it will deserialize it as a normal
           hash, silently discarding any placeholder keys and leaving the keys
           and all values unlocked.  To make Storable "croak()" instead, set
           $Storable::downgrade_restricted to a "FALSE" value.  To restore the
           default set it back to some "TRUE" value.

       files from future versions of Storable
           Earlier versions of Storable would immediately croak if they
           encountered a file with a higher internal version number than the
           reading Storable knew about.  Internal version numbers are
           increased each time new data types (such as restricted hashes) are
           added to the vocabulary of the file format.  This meant that a
           newer Storable module had no way of writing a file readable by an
           older Storable, even if the writer didn't store newer data types.

           This version of Storable will defer croaking until it encounters a
           data type in the file that it does not recognize.  This means that
           it will continue to read files generated by newer Storable modules
           which are careful in what they write out, making it easier to
           upgrade Storable modules in a mixed environment.

           The old behaviour of immediate croaking can be re-instated by
           setting $Storable::accept_future_minor to some "FALSE" value.

       All these variables have no effect on a newer Perl which supports the
       relevant feature.

ERROR REPORTING
       Storable uses the "exception" paradigm, in that it does not try to
       workaround failures: if something bad happens, an exception is
       generated from the caller's perspective (see Carp and "croak()").  Use
       eval {} to trap those exceptions.

       When Storable croaks, it tries to report the error via the "logcroak()"
       routine from the "Log::Agent" package, if it is available.

       Normal errors are reported by having store() or retrieve() return
       "undef".  Such errors are usually I/O errors (or truncated stream
       errors at retrieval).

WIZARDS ONLY
   Hooks
       Any class may define hooks that will be called during the serialization
       and deserialization process on objects that are instances of that
       class.  Those hooks can redefine the way serialization is performed
       (and therefore, how the symmetrical deserialization should be
       conducted).

       Since we said earlier:

           dclone(.) = thaw(freeze(.))

       everything we say about hooks should also hold for deep cloning.
       However, hooks get to know whether the operation is a mere
       serialization, or a cloning.

       Therefore, when serializing hooks are involved,

           dclone(.) <> thaw(freeze(.))

       Well, you could keep them in sync, but there's no guarantee it will
       always hold on classes somebody else wrote.  Besides, there is little
       to gain in doing so: a serializing hook could keep only one attribute
       of an object, which is probably not what should happen during a deep
       cloning of that same object.

       Here is the hooking interface:

       "STORABLE_freeze" obj, cloning
           The serializing hook, called on the object during serialization.
           It can be inherited, or defined in the class itself, like any other
           method.

           Arguments: obj is the object to serialize, cloning is a flag
           indicating whether we're in a dclone() or a regular serialization
           via store() or freeze().

           Returned value: A LIST "($serialized, $ref1, $ref2, ...)" where
           $serialized is the serialized form to be used, and the optional
           $ref1, $ref2, etc... are extra references that you wish to let the
           Storable engine serialize.

           At deserialization time, you will be given back the same LIST, but
           all the extra references will be pointing into the deserialized
           structure.

           The first time the hook is hit in a serialization flow, you may
           have it return an empty list.  That will signal the Storable engine
           to further discard that hook for this class and to therefore revert
           to the default serialization of the underlying Perl data.  The hook
           will again be normally processed in the next serialization.

           Unless you know better, serializing hook should always say:

               sub STORABLE_freeze {
                   my ($self, $cloning) = @_;
                   return if $cloning;         # Regular default serialization
                   ....
               }

           in order to keep reasonable dclone() semantics.

       "STORABLE_thaw" obj, cloning, serialized, ...
           The deserializing hook called on the object during deserialization.
           But wait: if we're deserializing, there's no object yet... right?

           Wrong: the Storable engine creates an empty one for you.  If you
           know Eiffel, you can view "STORABLE_thaw" as an alternate creation
           routine.

           This means the hook can be inherited like any other method, and
           that obj is your blessed reference for this particular instance.

           The other arguments should look familiar if you know
           "STORABLE_freeze": cloning is true when we're part of a deep clone
           operation, serialized is the serialized string you returned to the
           engine in "STORABLE_freeze", and there may be an optional list of
           references, in the same order you gave them at serialization time,
           pointing to the deserialized objects (which have been processed
           courtesy of the Storable engine).

           When the Storable engine does not find any "STORABLE_thaw" hook
           routine, it tries to load the class by requiring the package
           dynamically (using the blessed package name), and then re-attempts
           the lookup.  If at that time the hook cannot be located, the engine
           croaks.  Note that this mechanism will fail if you define several
           classes in the same file, but perlmod warned you.

           It is up to you to use this information to populate obj the way you
           want.

           Returned value: none.

       "STORABLE_attach" class, cloning, serialized
           While "STORABLE_freeze" and "STORABLE_thaw" are useful for classes
           where each instance is independent, this mechanism has difficulty
           (or is incompatible) with objects that exist as common process-
           level or system-level resources, such as singleton objects,
           database pools, caches or memoized objects.

           The alternative "STORABLE_attach" method provides a solution for
           these shared objects. Instead of "STORABLE_freeze" -->
           "STORABLE_thaw", you implement "STORABLE_freeze" -->
           "STORABLE_attach" instead.

           Arguments: class is the class we are attaching to, cloning is a
           flag indicating whether we're in a dclone() or a regular de-
           serialization via thaw(), and serialized is the stored string for
           the resource object.

           Because these resource objects are considered to be owned by the
           entire process/system, and not the "property" of whatever is being
           serialized, no references underneath the object should be included
           in the serialized string. Thus, in any class that implements
           "STORABLE_attach", the "STORABLE_freeze" method cannot return any
           references, and "Storable" will throw an error if "STORABLE_freeze"
           tries to return references.

           All information required to "attach" back to the shared resource
           object must be contained only in the "STORABLE_freeze" return
           string.  Otherwise, "STORABLE_freeze" behaves as normal for
           "STORABLE_attach" classes.

           Because "STORABLE_attach" is passed the class (rather than an
           object), it also returns the object directly, rather than modifying
           the passed object.

           Returned value: object of type "class"

   Predicates
       Predicates are not exportable.  They must be called by explicitly
       prefixing them with the Storable package name.

       "Storable::last_op_in_netorder"
           The "Storable::last_op_in_netorder()" predicate will tell you
           whether network order was used in the last store or retrieve
           operation.  If you don't know how to use this, just forget about
           it.

       "Storable::is_storing"
           Returns true if within a store operation (via STORABLE_freeze
           hook).

       "Storable::is_retrieving"
           Returns true if within a retrieve operation (via STORABLE_thaw
           hook).

   Recursion
       With hooks comes the ability to recurse back to the Storable engine.
       Indeed, hooks are regular Perl code, and Storable is convenient when it
       comes to serializing and deserializing things, so why not use it to
       handle the serialization string?

       There are a few things you need to know, however:

       o   You can create endless loops if the things you serialize via
           freeze() (for instance) point back to the object we're trying to
           serialize in the hook.

       o   Shared references among objects will not stay shared: if we're
           serializing the list of object [A, C] where both object A and C
           refer to the SAME object B, and if there is a serializing hook in A
           that says freeze(B), then when deserializing, we'll get [A', C']
           where A' refers to B', but C' refers to D, a deep clone of B'.  The
           topology was not preserved.

       That's why "STORABLE_freeze" lets you provide a list of references to
       serialize.  The engine guarantees that those will be serialized in the
       same context as the other objects, and therefore that shared objects
       will stay shared.

       In the above [A, C] example, the "STORABLE_freeze" hook could return:

               ("something", $self->{B})

       and the B part would be serialized by the engine.  In "STORABLE_thaw",
       you would get back the reference to the B' object, deserialized for
       you.

       Therefore, recursion should normally be avoided, but is nonetheless
       supported.

   Deep Cloning
       There is a Clone module available on CPAN which implements deep cloning
       natively, i.e. without freezing to memory and thawing the result.  It
       is aimed to replace Storable's dclone() some day.  However, it does not
       currently support Storable hooks to redefine the way deep cloning is
       performed.

Storable magic
       Yes, there's a lot of that :-) But more precisely, in UNIX systems
       there's a utility called "file", which recognizes data files based on
       their contents (usually their first few bytes).  For this to work, a
       certain file called magic needs to taught about the signature of the
       data.  Where that configuration file lives depends on the UNIX flavour;
       often it's something like /usr/share/misc/magic or /etc/magic.  Your
       system administrator needs to do the updating of the magic file.  The
       necessary signature information is output to STDOUT by invoking
       Storable::show_file_magic().  Note that the GNU implementation of the
       "file" utility, version 3.38 or later, is expected to contain support
       for recognising Storable files out-of-the-box, in addition to other
       kinds of Perl files.

       You can also use the following functions to extract the file header
       information from Storable images:

       $info = Storable::file_magic( $filename )
           If the given file is a Storable image return a hash describing it.
           If the file is readable, but not a Storable image return "undef".
           If the file does not exist or is unreadable then croak.

           The hash returned has the following elements:

           "version"
               This returns the file format version.  It is a string like
               "2.7".

               Note that this version number is not the same as the version
               number of the Storable module itself.  For instance Storable
               v0.7 create files in format v2.0 and Storable v2.15 create
               files in format v2.7.  The file format version number only
               increment when additional features that would confuse older
               versions of the module are added.

               Files older than v2.0 will have the one of the version numbers
               "-1", "0" or "1".  No minor number was used at that time.

           "version_nv"
               This returns the file format version as number.  It is a string
               like "2.007".  This value is suitable for numeric comparisons.

               The constant function "Storable::BIN_VERSION_NV" returns a
               comparable number that represent the highest file version
               number that this version of Storable fully support (but see
               discussion of $Storable::accept_future_minor above).  The
               constant "Storable::BIN_WRITE_VERSION_NV" function returns what
               file version is written and might be less than
               "Storable::BIN_VERSION_NV" in some configuations.

           "major", "minor"
               This also returns the file format version.  If the version is
               "2.7" then major would be 2 and minor would be 7.  The minor
               element is missing for when major is less than 2.

           "hdrsize"
               The is the number of bytes that the Storable header occupies.

           "netorder"
               This is TRUE if the image store data in network order.  This
               means that it was created with nstore() or similar.

           "byteorder"
               This is only present when "netorder" is FALSE.  It is the
               $Config{byteorder} string of the perl that created this image.
               It is a string like "1234" (32 bit little endian) or "87654321"
               (64 bit big endian).  This must match the current perl for the
               image to be readable by Storable.

           "intsize", "longsize", "ptrsize", "nvsize"
               These are only present when "netorder" is FALSE. These are the
               sizes of various C datatypes of the perl that created this
               image.  These must match the current perl for the image to be
               readable by Storable.

               The "nvsize" element is only present for file format v2.2 and
               higher.

           "file"
               The name of the file.

       $info = Storable::read_magic( $buffer )
       $info = Storable::read_magic( $buffer, $must_be_file )
           The $buffer should be a Storable image or the first few bytes of
           it.  If $buffer starts with a Storable header, then a hash
           describing the image is returned, otherwise "undef" is returned.

           The hash has the same structure as the one returned by
           Storable::file_magic().  The "file" element is true if the image is
           a file image.

           If the $must_be_file argument is provided and is TRUE, then return
           "undef" unless the image looks like it belongs to a file dump.

           The maximum size of a Storable header is currently 21 bytes.  If
           the provided $buffer is only the first part of a Storable image it
           should at least be this long to ensure that read_magic() will
           recognize it as such.

EXAMPLES
       Here are some code samples showing a possible usage of Storable:

               use Storable qw(store retrieve freeze thaw dclone);

               %color = ('Blue' => 0.1, 'Red' => 0.8, 'Black' => 0, 'White' => 1);

               store(\%color, 'mycolors') or die "Can't store %a in mycolors!\n";

               $colref = retrieve('mycolors');
               die "Unable to retrieve from mycolors!\n" unless defined $colref;
               printf "Blue is still %lf\n", $colref->{'Blue'};

               $colref2 = dclone(\%color);

               $str = freeze(\%color);
               printf "Serialization of %%color is %d bytes long.\n", length($str);
               $colref3 = thaw($str);

       which prints (on my machine):

               Blue is still 0.100000
               Serialization of %color is 102 bytes long.

       Serialization of CODE references and deserialization in a safe
       compartment:

               use Storable qw(freeze thaw);
               use Safe;
               use strict;
               my $safe = new Safe;
               # because of opcodes used in "use strict":
               $safe->permit(qw(:default require));
               local $Storable::Deparse = 1;
               local $Storable::Eval = sub { $safe->reval($_[0]) };
               my $serialized = freeze(sub { 42 });
               my $code = thaw($serialized);
               $code->() == 42;

WARNING
       If you're using references as keys within your hash tables, you're
       bound to be disappointed when retrieving your data. Indeed, Perl
       stringifies references used as hash table keys. If you later wish to
       access the items via another reference stringification (i.e. using the
       same reference that was used for the key originally to record the value
       into the hash table), it will work because both references stringify to
       the same string.

       It won't work across a sequence of "store" and "retrieve" operations,
       however, because the addresses in the retrieved objects, which are part
       of the stringified references, will probably differ from the original
       addresses. The topology of your structure is preserved, but not hidden
       semantics like those.

       On platforms where it matters, be sure to call "binmode()" on the
       descriptors that you pass to Storable functions.

       Storing data canonically that contains large hashes can be
       significantly slower than storing the same data normally, as temporary
       arrays to hold the keys for each hash have to be allocated, populated,
       sorted and freed.  Some tests have shown a halving of the speed of
       storing -- the exact penalty will depend on the complexity of your
       data.  There is no slowdown on retrieval.

BUGS
       You can't store GLOB, FORMLINE, REGEXP, etc.... If you can define
       semantics for those operations, feel free to enhance Storable so that
       it can deal with them.

       The store functions will "croak" if they run into such references
       unless you set $Storable::forgive_me to some "TRUE" value. In that
       case, the fatal message is turned in a warning and some meaningless
       string is stored instead.

       Setting $Storable::canonical may not yield frozen strings that compare
       equal due to possible stringification of numbers. When the string
       version of a scalar exists, it is the form stored; therefore, if you
       happen to use your numbers as strings between two freezing operations
       on the same data structures, you will get different results.

       When storing doubles in network order, their value is stored as text.
       However, you should also not expect non-numeric floating-point values
       such as infinity and "not a number" to pass successfully through a
       nstore()/retrieve() pair.

       As Storable neither knows nor cares about character sets (although it
       does know that characters may be more than eight bits wide), any
       difference in the interpretation of character codes between a host and
       a target system is your problem.  In particular, if host and target use
       different code points to represent the characters used in the text
       representation of floating-point numbers, you will not be able be able
       to exchange floating-point data, even with nstore().

       "Storable::drop_utf8" is a blunt tool.  There is no facility either to
       return all strings as utf8 sequences, or to attempt to convert utf8
       data back to 8 bit and "croak()" if the conversion fails.

       Prior to Storable 2.01, no distinction was made between signed and
       unsigned integers on storing.  By default Storable prefers to store a
       scalars string representation (if it has one) so this would only cause
       problems when storing large unsigned integers that had never been
       converted to string or floating point.  In other words values that had
       been generated by integer operations such as logic ops and then not
       used in any string or arithmetic context before storing.

   64 bit data in perl 5.6.0 and 5.6.1
       This section only applies to you if you have existing data written out
       by Storable 2.02 or earlier on perl 5.6.0 or 5.6.1 on Unix or Linux
       which has been configured with 64 bit integer support (not the default)
       If you got a precompiled perl, rather than running Configure to build
       your own perl from source, then it almost certainly does not affect
       you, and you can stop reading now (unless you're curious). If you're
       using perl on Windows it does not affect you.

       Storable writes a file header which contains the sizes of various C
       language types for the C compiler that built Storable (when not writing
       in network order), and will refuse to load files written by a Storable
       not on the same (or compatible) architecture.  This check and a check
       on machine byteorder is needed because the size of various fields in
       the file are given by the sizes of the C language types, and so files
       written on different architectures are incompatible.  This is done for
       increased speed.  (When writing in network order, all fields are
       written out as standard lengths, which allows full interworking, but
       takes longer to read and write)

       Perl 5.6.x introduced the ability to optional configure the perl
       interpreter to use C's "long long" type to allow scalars to store 64
       bit integers on 32 bit systems.  However, due to the way the Perl
       configuration system generated the C configuration files on non-Windows
       platforms, and the way Storable generates its header, nothing in the
       Storable file header reflected whether the perl writing was using 32 or
       64 bit integers, despite the fact that Storable was storing some data
       differently in the file.  Hence Storable running on perl with 64 bit
       integers will read the header from a file written by a 32 bit perl, not
       realise that the data is actually in a subtly incompatible format, and
       then go horribly wrong (possibly crashing) if it encountered a stored
       integer.  This is a design failure.

       Storable has now been changed to write out and read in a file header
       with information about the size of integers.  It's impossible to detect
       whether an old file being read in was written with 32 or 64 bit
       integers (they have the same header) so it's impossible to
       automatically switch to a correct backwards compatibility mode.  Hence
       this Storable defaults to the new, correct behaviour.

       What this means is that if you have data written by Storable 1.x
       running on perl 5.6.0 or 5.6.1 configured with 64 bit integers on Unix
       or Linux then by default this Storable will refuse to read it, giving
       the error Byte order is not compatible.  If you have such data then you
       you should set $Storable::interwork_56_64bit to a true value to make
       this Storable read and write files with the old header.  You should
       also migrate your data, or any older perl you are communicating with,
       to this current version of Storable.

       If you don't have data written with specific configuration of perl
       described above, then you do not and should not do anything.  Don't set
       the flag - not only will Storable on an identically configured perl
       refuse to load them, but Storable a differently configured perl will
       load them believing them to be correct for it, and then may well fail
       or crash part way through reading them.

CREDITS
       Thank you to (in chronological order):

               Jarkko Hietaniemi <jhi@iki.fi>
               Ulrich Pfeifer <pfeifer@charly.informatik.uni-dortmund.de>
               Benjamin A. Holzman <bah@ecnvantage.com>
               Andrew Ford <A.Ford@ford-mason.co.uk>
               Gisle Aas <gisle@aas.no>
               Jeff Gresham <gresham_jeffrey@jpmorgan.com>
               Murray Nesbitt <murray@activestate.com>
               Marc Lehmann <pcg@opengroup.org>
               Justin Banks <justinb@wamnet.com>
               Jarkko Hietaniemi <jhi@iki.fi> (AGAIN, as perl 5.7.0 Pumpkin!)
               Salvador Ortiz Garcia <sog@msg.com.mx>
               Dominic Dunlop <domo@computer.org>
               Erik Haugan <erik@solbors.no>

       for their bug reports, suggestions and contributions.

       Benjamin Holzman contributed the tied variable support, Andrew Ford
       contributed the canonical order for hashes, and Gisle Aas fixed a few
       misunderstandings of mine regarding the perl internals, and optimized
       the emission of "tags" in the output streams by simply counting the
       objects instead of tagging them (leading to a binary incompatibility
       for the Storable image starting at version 0.6--older images are, of
       course, still properly understood).  Murray Nesbitt made Storable
       thread-safe.  Marc Lehmann added overloading and references to tied
       items support.

AUTHOR
       Storable was written by Raphael Manfredi <Raphael_Manfredi@pobox.com>
       Maintenance is now done by the perl5-porters <perl5-porters@perl.org>

       Please e-mail us with problems, bug fixes, comments and complaints,
       although if you have compliments you should send them to Raphael.
       Please don't e-mail Raphael with problems, as he no longer works on
       Storable, and your message will be delayed while he forwards it to us.

SEE ALSO
       Clone.

perl v5.12.1                      2010-04-26                     Storable(3pm)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=Storable
Gedruckt am: 21.09.2017 19:29 GMT+0200 (2017-09-21T19:29:27+02:00)