UNIX ON-LINE Man Pages - Die Onlinehilfe

Die Syntax von Unixbefehlen wird in den entsprechenden Manpages dokumentiert. Hier können Sie diese Onlinehilfe für viele Standardbefehle abrufen.

Suchoptionen:
Seiten auflisten, welche beginnen mit:
A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z   ALPHA   NUM   ANDERE   ALLE
CPANPLUS::Config(3pm)  Perl Programmers Reference Guide  CPANPLUS::Config(3pm)

NAME
       CPANPLUS::Config

SYNOPSIS
           ### conf object via CPANPLUS::Backend;
           $cb   = CPANPLUS::Backend->new;
           $conf = $cb->configure_object;

           ### or as a standalone object
           $conf = CPANPLUS::Configure->new;

           ### values in 'conf' section
           $verbose = $conf->get_conf( 'verbose' );
           $conf->set_conf( verbose => 1 );

           ### values in 'program' section
           $editor = $conf->get_program( 'editor' );
           $conf->set_program( editor => '/bin/vi' );

DESCRIPTION
       This module contains defaults and heuristics for configuration
       information for CPANPLUS. To change any of these values, please see the
       documentation in "CPANPLUS::Configure".

       Below you'll find a list of configuration types and keys, and their
       meaning.

CONFIGURATION
   Section 'conf'
       hosts
           An array ref containing hosts entries to be queried for packages.

           An example entry would like this:

               {   'scheme' => 'ftp',
                   'path' => '/pub/CPAN/',
                   'host' => 'ftp.cpan.org'
               },

       allow_build_interactivity
           Boolean flag to indicate whether 'perl Makefile.PL' and similar are
           run interactively or not. Defaults to 'true'.

       base
           The directory CPANPLUS keeps all its build and state information
           in.  Defaults to ~/.cpanplus.

       buildflags
           Any flags to be passed to 'perl Build.PL'. See "perldoc
           Module::Build" for details. Defaults to an empty string.

       cpantest
           Boolean flag to indicate whether or not to mail test results of
           module installations to "http://testers.cpan.org". Defaults to
           'false'.

       cpantest_mx
           String holding an explicit mailserver to use when sending out
           emails for "http://testers.cpan.org". An empty string will use your
           system settings. Defaults to an empty string.

       debug
           Boolean flag to enable or disable extensive debuggging information.
           Defaults to 'false'.

       dist_type
           Default distribution type to use when building packages. See
           "cpan2dist" or "CPANPLUS::Dist" for details. An empty string will
           not use any package building software. Defaults to an empty string.

       email
           Email address to use for anonymous ftp access and as "from" address
           when sending emails. Defaults to an "example.com" address.

       enable_custom_sources
           Boolean flag indicating whether custom sources should be enabled or
           not. See the "CUSTOM MODULE SOURCES" in "CPANPLUS::Backend" for
           details on how to use them.

           Defaults to "true"

       extractdir
           String containing the directory where fetched archives should be
           extracted. An empty string will use a directory under your "base"
           directory. Defaults to an empty string.

       fetchdir
           String containing the directory where fetched archives should be
           stored. An empty string will use a directory under your "base"
           directory. Defaults to an empty string.

       flush
           Boolean indicating whether build failures, cache dirs etc should be
           flushed after every operation or not. Defaults to 'true'.

       force
           Boolean indicating whether files should be forcefully overwritten
           if they exist, modules should be installed when they fail tests,
           etc. Defaults to 'false'.

       lib An array ref holding directories to be added to @INC when CPANPLUS
           starts up. Defaults to an empty array reference.

       makeflags
           A string holding flags that will be passed to the "make" program
           when invoked. Defaults to an empty string.

       makemakerflags
           A string holding flags that will be passed to "perl Makefile.PL"
           when invoked. Defaults to an empty string.

       md5 A boolean indicating whether or not md5 checks should be done when
           an archive is fetched. Defaults to 'true' if you have "Digest::MD5"
           installed, 'false' otherwise.

       no_update
           A boolean indicating whether or not "CPANPLUS"' source files should
           be updated or not. Defaults to 'false'.

       passive
           A boolean indicating whether or not to use passive ftp connections.
           Defaults to 'true'.

       prefer_bin
           A boolean indicating whether or not to prefer command line programs
           over perl modules. Defaults to 'false' unless you do not have
           "Compress::Zlib" installed (as that would mean we could not extract
           ".tar.gz" files)

       prefer_makefile
           A boolean indicating whether or not prefer a "Makefile.PL" over a
           "Build.PL" file if both are present. Defaults to 'true', unless the
           perl version is at least 5.10.1 or appropriate versions of
           Module::Build and CPANPLUS::Dist::Build are available.

       prereqs
           A digit indicating what to do when a package you are installing has
           a prerequisite. Options are:

               0   Do not install
               1   Install
               2   Ask
               3   Ignore  (dangerous, install will probably fail!)

           The default is to ask.

       shell
           A string holding the shell class you wish to start up when starting
           "CPANPLUS" in interactive mode.

           Defaults to "CPANPLUS::Shell::Default", the default CPANPLUS shell.

       show_startup_tip
           A boolean indicating whether or not to show start up tips in the
           interactive shell. Defaults to 'true'.

       signature
           A boolean indicating whether or not check signatures if packages
           are signed. Defaults to 'true' if you have "gpg" or
           "Crypt::OpenPGP" installed, 'false' otherwise.

       skiptest
           A boolean indicating whether or not to skip tests when installing
           modules.  Defaults to 'false'.

       storable
           A boolean indicating whether or not to use "Storable" to write
           compiled source file information to disk. This makes for faster
           startup and look up times, but takes extra diskspace. Defaults to
           'true' if you have "Storable" installed and 'false' if you don't.

       timeout
           Digit indicating the time before a fetch request times out (in
           seconds).  Defaults to 300.

       verbose
           A boolean indicating whether or not "CPANPLUS" runs in verbose
           mode.  Defaults to 'true' if you have the environment variable
           "PERL5_CPANPLUS_VERBOSE" set to true, 'false' otherwise.

           It is recommended you run with verbose enabled, but it is disabled
           for historical reasons.

       write_install_log
           A boolean indicating whether or not to write install logs after
           installing a module using the interactive shell. Defaults to
           'true'.

       source_engine
           Class to use as the source engine, which is generally a subclass of
           "CPANPLUS::Internals::Source". Default to
           "CPANPLUS::Internals::Source::Memory".

       cpantest_reporter_args
           A hashref of key => value pairs that are passed to the constructor
           of "Test::Reporter". If you'd want to enable TLS for example, you'd
           set it to:

             { transport       => 'Net::SMTP::TLS',
               transport_args  => [ User => 'Joe', Password => '123' ],
             }

   Section 'program'
       editor
           A string holding the path to your editor of choice. Defaults to
           your $ENV{EDITOR}, $ENV{VISUAL}, 'vi' or 'pico' programs, in that
           order.

       make
           A string holding the path to your "make" binary. Looks for the
           "make" program used to build perl or failing that, a "make" in your
           path.

       pager
           A string holding the path to your pager of choice. Defaults to your
           $ENV{PAGER}, 'less' or 'more' programs, in that order.

       shell
           A string holding the path to your login shell of choice. Defaults
           to your $ENV{SHELL} setting, or $ENV{COMSPEC} on Windows.

       sudo
           A string holding the path to your "sudo" binary if your install
           path requires super user permissions. Looks for "sudo" in your
           path, or remains empty if you do not require super user permissions
           to install.

       perlwrapper
           A string holding the path to the "cpanp-run-perl" utility bundled
           with CPANPLUS, which is used to enable autoflushing in spawned
           processes.

BUG REPORTS
       Please report bugs or other issues to <bug-cpanplus@rt.cpan.org<gt>.

AUTHOR
       This module by Jos Boumans <kane@cpan.org>.

COPYRIGHT
       The CPAN++ interface (of which this module is a part of) is copyright
       (c) 2001 - 2007, Jos Boumans <kane@cpan.org>. All rights reserved.

       This library is free software; you may redistribute and/or modify it
       under the same terms as Perl itself.

SEE ALSO
       CPANPLUS::Backend, CPANPLUS::Configure::Setup, CPANPLUS::Configure

perl v5.12.1                      2010-04-26             CPANPLUS::Config(3pm)
 

Scannen Sie den Barcode um die Webseite zu öffnen


Quelle: http://www.trinler.net/de/service/doc/linux/man.html?command=CPANPLUS%3A%3AConfig
Gedruckt am: 28.05.2017 08:43 GMT+0200 (2017-05-28T08:43:34+02:00)